HELP! Racepak (IQ3) to MEFI 4B Interface

[James OLC]

Originally Posted by DJW32

I just found this...hope it helps

http://www.racepak.com/forums/viewforum.php?f=4

Thanks for looking; I've posted there a couple of times over the past six months (I think that all of the MEFI4 questions are mine).

I think that I have got the the right person at Racepak now and it does look like there might be an off the shelf solution for this (fingers crossed) which, if it does work, will represent a great opportunity (for the next guy who plans to do this). UPS willing I should know for sure tomorrow.

Thanks again everybody,
James

[Bowtieracing]

Originally Posted by reboot04

Thanks for looking; I've posted there a couple of times over the past six months (I think that all of the MEFI4 questions are mine).

I think that I have got the the right person at Racepak now and it does look like there might be an off the shelf solution for this (fingers crossed) which, if it does work, will represent a great opportunity (for the next guy who plans to do this). UPS willing I should know for sure tomorrow.

Thanks again everybody,
James

James,if you are talking with the racepak , can you ask is there any chance to get "plug in" system for GMs own harness ??

http://www.gmperformanceparts.com/Pa...roller_Kit.jsp

[James OLC]

Racepak was really helpful and overnighted an adapter that plugs directly into the MEFI4's harness and the IQ3's V-net cable. After some programming of the dash, we should be able to monitor and record all of the EFI's output channels on the dash.

So, crisis 1 is dealt with, now on the the programming...

Thanks to everybody who helped out with this, I appreciate it.

James

[XcYZ]

Cool, keep us posted.

[Bowtieracing]

Originally Posted by XcYZ

Cool, keep us posted.

Scott, give a racepak guys a tip at they could step in here,many potential bayers....

[James OLC]

Originally Posted by Bowtieracing

Scott, give a racepak guys a tip at they could step in here,many potential bayers....

I mantioned it to them. They seem really focused (obviously) on racing but I think that they realize that there is an increasing number of opportunities in the pro-touring arena - especially with LS conversions.

Plus, their new display dashes are actually on par if not cheaper than a lot of the "traditional" gauge options out there.

[Flash68]

Originally Posted by reboot04

I mantioned it to them. They seem really focused (obviously) on racing but I think that they realize that there is an increasing number of opportunities in the pro-touring arena - especially with LS conversions.

Plus, their new display dashes are actually on par if not cheaper than a lot of the "traditional" gauge options out there.

Hi James, I am looking at dash/gauge options now and came across this. Mind telling me, either here or PM, how much the IQ3 dash setup is? I don't see any pricing on their site.

thanks!

[Flash68]

Okay, found the pricing.

James, do you or anyone else know if you can simply run the IQ3 display for the $625 and maybe some accessories to hook it all up and that's it?

thanks