5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!!

[Blake Foster]

Yea thats it!

[4OfaKind]

Once the Line-x is all cleaned up they should blend in well with the back of the truck.

http://www.syborgtwinturbo.com/albums/Build/2008_12_03_KD_0.jpg

Marty,

I thought you mentioned somewhere that you were going to install a tonneau cover painted the red that's on the truck :question:

Mal

[GMracer]

hrm, going to have the see the whole truck polished and what not to get a feel for the lights, they look nice but even though I'm not a fan of all clear, the all clears now seemed to blend better. However, I'm sure like you said when it's all polished and cleaned up they'll look perfect

[syborg tt]

Good Afternoon All,

Quick Update the front cover is on

Kenny used the wood buck to form the mesh grille

http://www.syborgtwinturbo.com/albums/Build/2008_11_23_KD_3.jpg

Kenny Built the new Grille Insert

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_0.jpg

Front Cover mounted

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_1.jpg

[Jr]

What is a wood buck?

The grille looks great.

[badmatt]

^ a wood buck is essentially a wooden form.

and Marty........ my gawd....

[Ventoso]

nah nah, it's this!
http://www.northcoastjournal.com/072204/news0722-woodenbucks.jpg

:rofl:

[syborg tt]

What is a wood buck?

The grille looks great.


A wood buck is simple something to form the mesh over

http://www.syborgtwinturbo.com/albums/Build/2008_01_24_KD_0.jpg

[syborg tt]

now that's funny

any chance you can send me some of these and I can pay Kenny with them.

nah nah, it's this!
http://www.northcoastjournal.com/072204/news0722-woodenbucks.jpg

:rofl:

[Blake Foster]

[QUOTE=DJW32;191539]What is a wood buck?

[Block i think you mean

It's now the top of his head!!! :lol: :lol:

sorry buddy ............. i couldn't refuse

[RECOVERY ROOM]

You beat me to it:lol:

[65 347]

Marty, the truck is looking great!
What kind of mess is the grill and were can you get it?

[syborg tt]

Marty, the truck is looking great!
What kind of mess is the grill and were can you get it?


we borried the material from Maxwell House.


this is a great source for mesh.

http://www.customcargrills.com/

[comp-spec]

great looking truck guys

[jeff hanson]

Marty, it's lookin great man! Are you still thinking power tour? Are you gonna do the whole tour? I hope so, I'll get to see it at the Michigan stop!:cheers:

[syborg tt]

great looking truck guys


thank you Pete.


Marty, it's lookin great man! Are you still thinking power tour? Are you gonna do the whole tour? I hope so, I'll get to see it at the Michigan stop

Hi Jeff,

Not sure how far were going - I really want to take the truck to Indy Good Guy's

[syborg tt]

Good Morning All,

Yep it's late and I need to go to bed.

I figured I would post a few pics of the rear of the truck

Belly Pan - hiding the fuel cell and Charcoal Can

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_1.jpg

Cladding & Rear Cover mounted

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_2.jpg

Close up of the Painted Wheel - as requested

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_3.sized.jpg

[lhkustoms]

Marty lookin good it's gettin close im sure your getting alittle anxious

[syborg tt]

Marty lookin good it's gettin close im sure your getting alittle anxious

Nah, I just hanging out

No really i just want to go see it in person.

[syborg tt]

Good Afternoon All,

I've been working with Bob Thrash to come up with a car show display.
We are only planning to do a couple indoor shows but we need to have a display.

http://www.syborgtwinturbo.com/albums/Build/2008_11_02_syborg_display.jpg

Ron from WMC Design & Engineering
Converted Bob's Sketch into a digital & Cad Drawings.

http://www.syborgtwinturbo.com/albums/Build/2008_11_02_Display_001.jpg

Some of you may know Ron from www.hoodpins.com
I've worked with Ron on the Hood Pins & Brake Pedal Assembly.

[email protected]

http://www.syborgtwinturbo.com/albums/Build/2008_11_02_Display_001.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_11_02_Display_002.jpg

We are also going to be using lightweight glassless mirrors from

www.glasslessmirror.com

http://barbellcompany.com/components/com_virtuemart/shop_image/product/f181fcb61fedc4c849352fd6edbe8fcb.jpg

More to come next week From Kenny.
He's been busy working on Dad's 57

[ironworks]

Sweet display, It looks like a bunch of gas pedals.....haha

[syborg tt]

Sweet display, It looks like a bunch of gas pedals.....haha

Yep, I fgured you would see the similarities.

[tones2SS]

Display looks good.
Truck is coming along as well.:thumbsup:

[novanutcase]

Can I use the display after your done?:lol:

Nice!

John

[customcam]

Very cool :thumbsup:

[T-Type]

amazing truck!

[syborg tt]

Hi All,

First off I am very sorry for the slow updates.
We should be back on track next week

I figured I would show you the Valve Covers
Rich from Milton Paint Werks prepped them for Bob.
[email protected]

http://www.syborgtwinturbo.com/albums/Build/2008_12_07_Bob_Thrash_007.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_07_Bob_Thrash_010.jpg

Here's Bob - laying out the stencils for the graphics

http://www.syborgtwinturbo.com/albums/Build/2008_12_07_Bob_Thrash_013.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_07_Bob_Thrash_015.jpg

Teaser of what they may look like.

http://www.syborgtwinturbo.com/albums/Build/2008_12_07_Bob_Thrash_016.jpg

I will post some pics tomorrow of all of the prepwork that went into these to get the ready for graphics

[syborg tt]

amazing truck!


thank you

[DOOM]

Marty its lookin good!!!! Also can you ask BOB whos paper he uses for his stencils???

[syborg tt]

Good Morning All,

I know this post is a little out of sequence.

Rich understand what it takes to prep the valve covers for Bob.
Rich & Bob have been working together for years.
[email protected]

http://www.syborgtwinturbo.com/albums/Build/2008_12_02_mpw_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_02_mpw_1.jpg

Intake Tube Prepped and ready for final Paint.
Notice the Rendering in the background one of my top 10 favorite cars.

http://www.syborgtwinturbo.com/albums/Build/2008_12_02_mpw_3.jpg

The goal was to keep the welds visible since they add to the look of the motor.

http://www.syborgtwinturbo.com/albums/Build/2008_12_02_mpw_6.jpg

All primed and ready for paint.

http://www.syborgtwinturbo.com/albums/Build/2008_12_02_mpw_7.jpg

Milton Paint Werks - [email protected]

[syborg tt]

Marty its lookin good!!!! Also can you ask BOB whos paper he uses for his stencils???

Mario shoot me an e-mail and i'll give you the name of the sign shop Bob uses in Manteno

[email protected]

[customcam]

looking good
Thats a foose Render for Sickfish
Eng bay
http://i157.photobucket.com/albums/t47/EV427/69699286.jpg

[notorious1970]

Marty,
When are you going to fire the beast up?

[syborg tt]

Good Morning All,

Yep, Kenny wanted to kill me but we just had to do it.

http://www.syborgtwinturbo.com/albums/Build/2009_02_12_Billet_logo.gif

First Off Billet Specialties makes one of the cleanest Serpentine Systems
Tru Trac Serpentine Systems
http://www.billetspecialties.com/product.asp?cid=23&scid=182

Our goal was to remove some of the lines under the hood to try to clean things up just a little bit.

I talked with the Scott over at Billet Specialties and the had me Contact DSE and order one of there pumps.

http://www.syborgtwinturbo.com/albums/Build/2009_02_12_DSE_Logo.jpg

Mark at DSE stepped in and put together all of the parts I would need to swap in the new pump.

http://www.syborgtwinturbo.com/albums/Build/2009_02_12_DSE_PS_Pump_001.jpg

Two day's later all of the parts arrived and I headed over to Billet Specialties where they installed the new pulley.

http://www.syborgtwinturbo.com/albums/Build/2009_02_12_DSE_BS_Pulley_008.jpg

Polished Aluminum Power Steering Pump w/Intergral Reservoir 090901P
(-6) DSE Pressure Line for Integral Reservoir Pump 091702
1/4" NPT to -6 Return Fitting 091501
Power Steering Pulley TTC-13212

I'll try to post some before and after pics next week.

Update: Syborg Build Posters Coming Soon !!

[syborg tt]

Marty,
When are you going to fire the beast up?

uhm - i think today

[Jr]

Marty,
Will you take your camcorder? This is so cool!

Marty,
Where is the web link to your 2nd gen build?

[syborg tt]

Marty,
Will you take your camcorder? This is so cool!

Marty,
Where is the web link to your 2nd gen build?

Actually that would be up to Kenny & Travis for the Video, I just hope they call me so i can here it run.

I haven't really started a build thread on the Camaro yet. I need to get a couple things straightened out in my garage before I bring it home. I need to reconfigure the cabinets.

here is a link to the pics

http://garagescene.net/gallery2/v/Builders/Sportmachines/

[tones2SS]

I can't wait to see/hear the video.
Should be AWESOME!!:cheers:

[cousin]

This just it!!!! IT RUNS

Just got the call from Marty, Kenny's has it running and it's "UNBELIEVABLE"

Marty got the call from Kenny on his way into church.

[syborg tt]

Good Afternoon All,

I've had the pleasure of working with Poster by Simon the past couple weeks.

He posted up that he was willing to do some posters on one of the BB's.
http://www.pro-touring.com/forum/showthread.php?t=51938

I contacted him immediately and asked if he would be interested in doing a series of Posters.
So far two have been completed and we are just beginning to work on the 3rd.

http://www.syborgtwinturbo.com/albums/Merchandise/Poster_1_333_x_500.jpg

Simon has been a pleasure to work with and am looking forward to seeing
what he comes up with next.

http://www.syborgtwinturbo.com/albums/Merchandise/Poster_2_333_x_500.jpg

You can contact him at [email protected]

The size of the poster is 20"x30" (50x75cm)
printed on high quality glossy Kodak photo paper.
Delivery time is about 2 weeks.

Price examples:
1 Poster: $16.00 + $17.00 Shipping
3 Posters: $45.00 + $17.00 Shipping
6 Posters: $90.00 + $17.00 Shipping

You can see other posters that Simon created at:
http://posters.simonholm.com

ps -- as some of you may know the truck is running and yes i am behind with my updates.

[syborg tt]

Good Morning All,

Just a couple quick photo's.

Here is what the motor looked like right before Kenny Started it.

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_1.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_2.jpg

This should be the link to the Video but Kenny can't figure out how to Upload it.

--- Missing Link --

Not to worry I will have Video next week.

[tones2SS]

Good Morning All,

Just a couple quick photo's.

Here is what the motor looked like right before Kenny Started it.

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_1.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_2.jpg

This should be the link to the Video but Kenny can't figure out how to Upload it.

--- Missing Link --

Not to worry I will have Video next week.

Nice!!!
can't wait for the video.:lateral:

[68/Camaro]

Marty, The Engine Compartment is Wicked:hail:

[syborg tt]

Marty, The Engine Compartment is Wicked:hail:

thanks Bill - just wait till next week.
ps - i sent you an e-mail about the Clutch, Brake & Gas Pedal for you 69. (( There pretty cool aren't they ))

[G-Body]

Love the valve covers painted!
Are those the clamps your going to run on the intake tube?

[Kendall Burleson]

killer job well done long time coming!:thumbsup: :thumbsup:

[Kendall Burleson]

Marty are you going on the power tour?

[syborg tt]

Love the valve covers painted!
Are those the clamps your going to run on the intake tube?


The clamps are just on to get the motor running. I am still trying to find something really trick.

Power Tour - I will be there with the truck or the 57

[Bakaruda]

I looked thru most of this post. All I can say is wow man. This is one nice truck.:hail:

[syborg tt]

I looked thru most of this post. All I can say is wow man. This is one nice truck.:hail:

Thank you very much. Because of this truck I've made some great friends and lerned a bunch.

Once again thank you

[GMracer]

Thank you very much. Because of this truck I've made some great friends and lerned a bunch.

Once again thank you

That's the best part of this hobby :thumbsup:

[Musclerodz]

The clamps are just on to get the motor running. I am still trying to find something really trick.

Power Tour - I will be there with the truck or the 57 CNC machined transitions and Gates heat shrink clamps

[syborg tt]

CNC machined transitions and Gates heat shrink clamps

That would be the end goal to have something exactly like that.

[G-Body]

I cant imagine how quick this truck will be, I rode in my Brothers syclone when he bought his and it ran good stock! Great work and a great job staying focused and patient through out the build.

[syborg tt]

As Promised

Fo7pnYH4qWE

[98ssnova]

Sweet now put the hood on and scare some cones!!:cheers:

[awr68]

It's alive!!
Awesome!! :cheers:

[tones2SS]

AWESOME Marty.:thumbsup:
You must be sikked. How close till she's done?

[syborg tt]

AWESOME Marty.:thumbsup:
You must be sikked. How close till she's done?

Debut is scheduled for Good Guys Columbus

[Payton King]

your face.

When are you going to get to drive it?

[Evan Iroc-Z]

I know this is my first post on this site, but I have been following this post for the past 3 years solid. It is an amazing build and I am thoroughly impressed.

[kidnow]

Dido what Evan said. I live in Columbus and will be seeing its debut in person. I haven't been this excited since the Notorious thread and its unveiling last summer. :woot:

[G-Body]

Cant wait to see it at C- town aswell whos "booth" will it be at this is a 72 and older show to bad this thing would clean up some awards if it showed.:thumbsup:

[J2SpeedandCustom]

Debut is scheduled for Good Guys Columbus

GM made that truck in the 60's as a prototype right???????? :lol:

I just want to see it on the dyno!!!! get that ar-kansas connection going already geez...

[customcam]

Congrats Marty im happy for ya man
Absolute killer build :thumbsup:

[syborg tt]

Thanks for all the compliments Guy's.

I really owe it to all the people that have helped build this thing and there have been plenty. All I can say is that I am really excited to see the truck finished and I had a great time hanging out at kenny's this past weekend.

Well worth the 1300 mile round trip drive.

[syborg tt]

Good Morning All,

Okay were back and having fun.

Dave at Comp Fab did all of the metal work in the bed and left the paint details for Kenny.

http://www.syborgtwinturbo.com/albums/Build/2008_11_16_KD_17.jpg

If you can remember most of the bed is Rhino Lined.
To show a contrast Kenny Powder Coated the front Sheet Metal.

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_GT_13.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_GT_34.jpg

All of the Panels have Zeus fasteners so we can get in fairly quick.
The Center panel exposes the Air Ride and Fuel Pressure Regulator, the
Passenger side is for the Battery and the drivers side is for Storage only.

http://www.syborgtwinturbo.com/albums/Build/2009_02_23_KD_GT_2.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_02_23_KD_GT_5.jpg

Fuel Injected Media - Revolution Industries, www.rev-in.com
www.sportmachines.com www.syborgtwinturbo.com www.kdhotrods.com www.compfab.com
www.rockfordracecraft.com www.autometer.com www.airbagparts.com www.nitrousexpress.com
www.hydroillusions.com www.revolutionbrake.com www.stainlessworks.net www.billetspecialties.com
www.docskustom.com www.flamingriver.com www.raceprovenmotors.com www.wiresandpliers.com
www.bowlertransmissions.com www.ridetech.com www.hoodpins.net www.carterhickmandesigns.com
www.goodmarkindustries.com www.juxtaposedmachines.com www.belltechcorp.com
www.sparcousa.com www.kicker.com www.modoinnovations.com
www.recoveryroominteriors.com graphik by --- [email protected]
Milton Paint Werks - [email protected]
www.twistmachine.com www.techflex.com
www.cascadeaudio.com

[tones2SS]

Good Morning All,

Okay were back and having fun.

Dave at Comp Fab did all of the metal work in the bed and left the paint details for Kenny.

http://www.syborgtwinturbo.com/albums/Build/2008_11_16_KD_17.jpg

If you can remember most of the bed is Rhino Lined.
To show a contrast Kenny Powder Coated the front Sheet Metal.

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_GT_13.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_GT_34.jpg

All of the Panels have Zeus fasteners so we can get in fairly quick.
The Center panel exposes the Air Ride and Fuel Pressure Regulator, the
Passenger side is for the Battery and the drivers side is for Storage only.

http://www.syborgtwinturbo.com/albums/Build/2009_02_23_KD_GT_2.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_02_23_KD_GT_5.jpg

Fuel Injected Media - Revolution Industries, www.rev-in.com
www.sportmachines.com www.syborgtwinturbo.com www.kdhotrods.com www.compfab.com
www.rockfordracecraft.com www.autometer.com www.airbagparts.com www.nitrousexpress.com
www.hydroillusions.com www.revolutionbrake.com www.stainlessworks.net www.billetspecialties.com
www.docskustom.com www.flamingriver.com www.raceprovenmotors.com www.wiresandpliers.com
www.bowlertransmissions.com www.ridetech.com www.hoodpins.net www.carterhickmandesigns.com
www.goodmarkindustries.com www.juxtaposedmachines.com www.belltechcorp.com
www.sparcousa.com www.kicker.com www.modoinnovations.com
www.recoveryroominteriors.com graphik by --- [email protected]
Milton Paint Werks - [email protected]
www.twistmachine.com www.techflex.com
www.cascadeaudio.com

THAT LOOKS KILLER MARTY!!!!:hail: :wow:
Very nice.

[syborg tt]

Good Morning All,

Just posting up a few pictures.

Close up of the incredible paint detail work that Bob does.

http://www.syborgtwinturbo.com/albums/Build/2008_11_10_KD_GT_3.jpg

If you look close the headlight surround is a painted a slightly different color.

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_GT_9.jpg

Have you every wondered what a $2.75 zip tie looks like?

http://www.syborgtwinturbo.com/albums/Build/2008_12_3_KD_GT_10.jpg

These are Stainless Steel Harsh-Enviroment Cable Tie, Nylon-Coated

http://www.syborgtwinturbo.com/albums/Build/2008_12_3_KD_GT_17.jpg

Fuel Injected Media - Revolution Industries, www.rev-in.com
www.sportmachines.com www.syborgtwinturbo.com www.kdhotrods.com www.compfab.com
www.rockfordracecraft.com www.autometer.com www.airbagparts.com www.nitrousexpress.com
www.hydroillusions.com www.revolutionbrake.com www.stainlessworks.net www.billetspecialties.com
www.docskustom.com www.flamingriver.com www.raceprovenmotors.com www.wiresandpliers.com
www.bowlertransmissions.com www.ridetech.com www.hoodpins.net www.carterhickmandesigns.com
www.goodmarkindustries.com www.juxtaposedmachines.com www.belltechcorp.com
www.sparcousa.com www.kicker.com www.modoinnovations.com
www.recoveryroominteriors.com graphik by --- [email protected]
Milton Paint Werks - [email protected]
www.twistmachine.com www.techflex.com
www.cascadeaudio.com

[notorious1970]

so close!! Congrats Marty!

[customcam]

Trully awsome :hail:

[bentfab]

Looking slick Marty!!!!! I like the colors and stance.

[syborg tt]

05-08-09 Update - WMC Design Hood Pin Washer

Good Morning All,

Continuing with the little detail theme this week.
Once I again we got a hold of Ron Wilson at WMC Design
[email protected]

In order to clean up the Core Support Hood Pin Ron & I worked on a core support trim plate.

http://www.syborgtwinturbo.com/albums/Build/2009_03_09_HP_Plate_004.jpg

Ron sent me several Solid Works drawings so I could get an Idea of how they would look.

http://www.syborgtwinturbo.com/albums/Build/2009_03_09_HP_Plate_005.jpg

Below is the final Product.
I couldn't be happier.


http://www.syborgtwinturbo.com/albums/Build/2009_03_13_WMC_009.jpg


http://www.syborgtwinturbo.com/albums/Build/2009_03_13_WMC_011.jpg


Fuel Injected Media - Revolution Industries, www.rev-in.com
www.sportmachines.com www.syborgtwinturbo.com www.kdhotrods.com www.compfab.com
www.rockfordracecraft.com www.autometer.com www.airbagparts.com www.nitrousexpress.com
www.hydroillusions.com www.revolutionbrake.com www.stainlessworks.net www.billetspecialties.com
www.docskustom.com www.flamingriver.com www.raceprovenmotors.com www.wiresandpliers.com
www.bowlertransmissions.com www.ridetech.com www.hoodpins.net www.carterhickmandesigns.com
www.goodmarkindustries.com www.juxtaposedmachines.com www.belltechcorp.com
www.sparcousa.com www.kicker.com www.modoinnovations.com
www.recoveryroominteriors.com graphik by --- [email protected]
Milton Paint Werks - [email protected]
www.twistmachine.com www.techflex.com
www.cascadeaudio.com

[syborg tt]

Looking slick Marty!!!!! I like the colors and stance.

Trully awsome :hail:


Thanks Guy's

[ProTouring442]

I usually explain to people that my car is "cheaper than a shrink." In you case however, I think a year or two in the psych ward may have been a less expensive alternative!

This thing looks sick! And the attention to detail is stunning. My hat is off to you and your builders, great job! No go get the damned thing finished!!

Shiny Side Up!
Bill

[syborg tt]

LOL - yep i will need a shrink after this project for sure.

I usually explain to people that my car is "cheaper than a shrink." In you case however, I think a year or two in the psych ward may have been a less expensive alternative!

This thing looks sick! And the attention to detail is stunning. My hat is off to you and your builders, great job! No go get the damned thing finished!!

Shiny Side Up!
Bill

[syborg tt]

Good Morning All,

The Rear Corner is on for the Final Time.
I know -- ignore the Clear Taillights please.

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_GT_26.jpg

We needed to find a very low profile License Plate Frame.
So a Quick call to the Guy's at Billet Specialties.

Slim Line Plain
http://www.billetspecialties.com/item.asp?cid=6&scid=83&pid=554

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_LP_Frame.jpg

Yep, that is a real Illinois License Plate.

http://www.syborgtwinturbo.com/albums/Build/2009_02_25_KD_GT_1.jpg

Just wanted to show off the Bob Thrash Graphics
[email protected]

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_031.jpg

More to come on Thursday

[syborg tt]

I usually explain to people that my car is "cheaper than a shrink." In you case however, I think a year or two in the psych ward may have been a less expensive alternative!

This thing looks sick! And the attention to detail is stunning. My hat is off to you and your builders, great job! No go get the damned thing finished!!

Shiny Side Up!
Bill

Hi Bill,

While I was surfing one of the other BB's a member did an article on WordPress. It's pretty cool and it's all the therapy that I will ever need.

Minitruckers: Saving the Economy and Ruining Relationships Since The Late 70’s

http://toolow4u.wordpress.com/2009/05/07/minitruckers-saving-the-economy-and-ruining-relationships-since-the-late-70s/

[awr68]

Coming together nicely guys! You have to be getting real excited Marty! :thumbsup:

[OLDFLM]

Looks INCREDIBLE my friend! :thumbsup: Just waiting for a bunch of all buttoned up on the ground pics and a long walk around video!! :yes:

[syborg tt]

Thursday's Teaser Pics

http://www.syborgtwinturbo.com/albums/Build/2008_12_28_ST_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_12_29_ST_2.jpg

[syborg tt]

05-19-09 Update - Mesh Grille

Good Afternoon,

I've had many question about the mesh grille and how it was built.
So today's post is about the grille.

http://www.syborgtwinturbo.com/albums/Build/2008_11_25_KD_GT_0.jpg

Way back when, Kenny had the grille 3D scanned and from that Wood Bucks were made.

http://www.syborgtwinturbo.com/albums/Build/2008_11_25_KD_GT_2.jpg


The Mesh was cut and the laid on top of the wood form.
Then all you do is gentle hammer the mesh around the wood buck.

http://www.syborgtwinturbo.com/albums/Build/2008_11_25_KD_GT_5.jpg

Trim the excess material and you end up with something that looks like this.
It's hard to tell from the picture but the mesh is in the same shape as the factory grille

http://www.syborgtwinturbo.com/albums/Build/2008_11_25_KD_GT_8.jpg

Cut out the old grille

http://www.syborgtwinturbo.com/albums/Build/2008_11_25_KD_GT_12.jpg

Here is how the grille looks installed in the truck.

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_GT_17.jpg

Another close up to show how it lines up.

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_GT_14.jpg

Final Parting Shot

http://www.syborgtwinturbo.com/albums/Build/2008_12_01_KD_GT_12.jpg

[G-Body]

Suppppppppppppper sweet very clean and simple.

[syborg tt]

Happy Friday

I wanted to post up the weekly teaser pics and I found some great pics that Josh Mishler took

www.juxtaposedmachines.com [email protected]

http://www.syborgtwinturbo.com/albums/Build/2008_08_26_Josh_40.sized.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_08_26_Josh_42_001.sized.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_08_26_Josh_45.sized.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_08_26_Josh_50_001.sized.jpg

If you go to the website you can grab a larger image of these 4 pictures

[mexMan]

Q: when is the engine cover going to be ready? I can't wait to see this finished, I've been folloing the building from here and from pro-touring.com too, and this is one of my favorite builds

[J2SpeedandCustom]

I want to see it on the DYNO!!!!

[syborg tt]

Good Morning All,

The theme for today's update is Change is Good.

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_11.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_9.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_10.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_13_KD_GT_5.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_13_KD_GT_2.jpg

[syborg tt]

Q: when is the engine cover going to be ready? I can't wait to see this finished, I've been folloing the building from here and from pro-touring.com too, and this is one of my favorite builds

Thank you for the compliments on the truck

As far as the engine cover - we are going to hold off at this time. However it may happen at some point.

[boonedog]

Good Morning All,

The theme for today's update is Change is Good.

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_11.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_9.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_10.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_13_KD_GT_5.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_13_KD_GT_2.jpg



love the color on the peices looks good amazing change fron the alum.

[radrambler]

marty

so now your using obama lines in your post.....wtf.......:rofl: change is good.....lol
stay away from the kool aid in chicago marty....

i had too..

really looks good
tom

[syborg tt]

Hey if Obama can use and people believe him, I say why not let me use it.

thanks again for the compliments


marty

so now your using obama lines in your post.....wtf.......:rofl: change is good.....lol
stay away from the kool aid in chicago marty....

i had too..

really looks good
tom

[syborg tt]

Good Afternoon All,

It's been a long week and I am sorry that I didn't get this post out sooner.

I've been working with Ron at WMC Design
(( [email protected] )) www.wmcdesigns.com

In Order to clean up the engine bay you have all seen the new color.
Now to make it stand out Ron is designing and cutting us some Billet Valve Cover Emblems

Here are the Final Renderings

http://www.syborgtwinturbo.com/albums/Build/2009_05_03_Syborg_1_1.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_05_03_Syborg_1_2.jpg

In order to save money Ron cut the samples out of Plexiglass.

http://www.syborgtwinturbo.com/albums/Build/2009_05_03_WMC_17.jpg

Final Part - Cut to Size

http://www.syborgtwinturbo.com/albums/Build/2009_05_03_WMC_10.jpg

Ron shipped Kenny a 6" and a 8" Version for fitment.

http://www.syborgtwinturbo.com/albums/Build/2009_05_07_WMC_3.jpg

Once Kenny chooses the size he likes on the valve cover Ron will cut the new billet emblems.

[awr68]

First class all the way!! :cheers: :thumbsup:

[black2002ls]

That is too cool. I'm sure you've got something planned for those plexiglass pieces?

[Ricochet]

Just can't keep up with you Marty!! Just about to get it all done and you go and rip it apart? :lol: I've been there - most people scratch their heads and think your crazy - but you have to do what you have to do, right?

When will it be back together in black?

[syborg tt]

That is too cool. I'm sure you've got something planned for those plexiglass pieces?


yep there going to be changed into billet emblems for the valve covers. Should have pics next week.

[syborg tt]

Just can't keep up with you Marty!! Just about to get it all done and you go and rip it apart? :lol: I've been there - most people scratch their heads and think your crazy - but you have to do what you have to do, right?

When will it be back together in black?

LOL - I know, I know it's getting closer every day. Just trying to get it the way it needs to be.

ps - and nope Kenny hasn't threatened to kill me anytime soon.

[tones2SS]

Those look awesome!:cheers:

[Roadster Shop]

The truck is looking killer. Insane amount of detail!

[syborg tt]

Back to working on the Garage again. Like I said getting ready for the next project car.

I needed space for Parts and Tires. The plan is to suspend a shelf even with the attic area.

Dennis at Hi-Speed Welding (( www.highspeedwelding.com )) ordered me some heavy wall
2 x 2 Square tubing and welded tabs on the ends.

Spent about 2 hours sanding them smooth, getting them ready for paint.

http://www.syborgtwinturbo.com/albums/Garage/2009_04_05_Garage_006.jpg

All painted in Chassis Black

http://www.syborgtwinturbo.com/albums/Garage/2009_04_05_Garage_014.jpg

Picture of the center support brackets that will tie into the ceiling

http://www.syborgtwinturbo.com/albums/Garage/2009_04_05_Garage_016.jpg

I hung the first 20 footer, man is that hard to do by yourself. You can also see that the
center supports are already hung. Okay that was also a pain in the butt.

http://www.syborgtwinturbo.com/albums/Garage/2009_04_05_Garage_020.jpg

There are three 3/8" lag bolts that tie the center supports in the ceiling rafters. I had to put in
two extra boards in the attic to anchor the center support.

http://www.syborgtwinturbo.com/albums/Garage/2009_04_05_Garage_025.jpg

Okay the shelf is up.
The center will be used for Tire Storage and the corners will be used for parts storage.

http://www.syborgtwinturbo.com/albums/Garage/2009_04_05_Garage_028.jpg

Still to do is build the uprights and I this time I am going to have the center supports
powder coated by Jay over at Pro-Tek Powder Coating (( www.propowder.com ))

[syborg tt]

The truck is looking killer. Insane amount of detail!


I've learned a lot from shops liek yours. Thank you for the compliment.

ps - when are you guy's going to build a 2nd gen chassis. I even have a donor car you guy's can borrow.

[tones2SS]

Garage looks good Marty. "Extra" storage space is always key!!:thumbsup: :cheers:

[Roadster Shop]

I've learned a lot from shops liek yours. Thank you for the compliment.

ps - when are you guy's going to build a 2nd gen chassis. I even have a donor car you guy's can borrow.

Bring it down... we have an open chassis table. Just finished our new 1st gen Nova chassis so we have freed up the chassis table and are ready to design a new chassis.

[syborg tt]

Good Afternoon All,

Quick Update on the Valve Cover Script

http://www.syborgtwinturbo.com/albums/Build/2009_06_10_KD_1.jpg

So you get the idea what were going for.

http://www.syborgtwinturbo.com/albums/Build/2009_06_10_KD_2.jpg

WMC Design has been kicking but.
(( [email protected] )) www.wmcdesigns.com
Ron started cutting late last night.

http://www.syborgtwinturbo.com/albums/Build/2009_06_11_WMC_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_06_11_WMC_1.jpg

Close Up of how they look this afternoon.

http://www.syborgtwinturbo.com/albums/Build/2009_06_12_WMC_1.jpg

A little closer

http://www.syborgtwinturbo.com/albums/Build/2009_06_12_WMC_0.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_06_12_WMC_1_001.jpg

[tones2SS]

Very nice.:yes:

[customcam]

There going to look awsome :cool:

[J2SpeedandCustom]

Starting the chant - DYNO DYNO DYNO DYNO DYNO DYNO DYNO! Come on already are you scared you won't be able to handle the power? :lol:

[syborg tt]

Good Morning,

http://www.syborgtwinturbo.com/albums/Build/stainlessworks.jpg

Kenny's been busy working on the exhaust exit
We ordered a set of exhaust tips from the guy's at Stainless Works.

We ordered there part # 791250
Double Wall Straight Cut Exhaust Tip, 3" body, 2 1/2" id inlet

http://www.stainlessworks.net/cart/product_info.php?cPath=23_182&products_id=1188

http://www.syborgtwinturbo.com/albums/Build/2009_03_30_Exhaust_Tip.jpg

Kenny move the exhaust cut out to the rear of the ground effect.
He is also shapping the fiberglass around he exahust tip to give it a finished look.

http://www.syborgtwinturbo.com/albums/Build/2009_05_07_KD_0.jpg

Side View.

http://www.syborgtwinturbo.com/albums/Build/2009_05_07_KD_1.jpg

[syborg tt]

Starting the chant - DYNO DYNO DYNO DYNO DYNO DYNO DYNO! Come on already are you scared you won't be able to handle the power? :lol:

you've got Kenny's e-mail send away

ps - it's going to hit the dyno back in Chicago at Troy's

[bill amsley]

wow quite a project , keep up the good work

[syborg tt]

Well Back at it again

Moving the Cabinets around to create workspace for the next project car.

First two cabinets moved

http://www.syborgtwinturbo.com/albums/Garage/2009_05_17_5.jpg

Couple more

http://www.syborgtwinturbo.com/albums/Garage/2009_05_17_6.jpg

I am going to fill the void between the cabinets with a shelf for my Radio

http://www.syborgtwinturbo.com/albums/Garage/2009_05_17_7.jpg

http://www.syborgtwinturbo.com/albums/Garage/2009_05_17_8.jpg

Radio Shelf is up

http://www.syborgtwinturbo.com/albums/Garage/2009_05_26_13.jpg

stepping back you can get a better idea of what it looks like

http://www.syborgtwinturbo.com/albums/Garage/2009_05_26_14.jpg

Still have plenty of work to do

http://www.syborgtwinturbo.com/albums/Garage/2009_05_26_16.jpg

I also hung 2 of the posters that Simon did for me.

http://www.syborgtwinturbo.com/albums/Garage/2009_04_12_Posters_003.jpg

You can see other posters that Simon created at:

http://posters.simonholm.com

You can contact him at [email protected]

[syborg tt]

Good Afternoon All,

Friday Teaser Pictures

WMC Design - Emblems are off the machine heading over to the Buffer

(( [email protected] )) www.wmcdesigns.com

http://www.syborgtwinturbo.com/albums/Build/2009_06_12_WMC_Syborg_9.jpg

Ron even polishing them for me - What a nice guy

http://www.syborgtwinturbo.com/albums/Build/2009_06_12_WMC_Syborg_11.jpg

[mexMan]

syborg tt, when is the engine cover going to be ready? I can't wait to see it finished, I mean is in it's final step but, how much is going to be there? I CAN'T WAIT!

[syborg tt]

syborg tt, when is the engine cover going to be ready? I can't wait to see it finished, I mean is in it's final step but, how much is going to be there? I CAN'T WAIT!

No Plans to build the engine cover right now as we are trying to get the truck ready for the Sy Ty Nationals in August.

But it may happen in the future.

[awr68]

I love the hand drawn artwork hanging above the bench....way to keep it real my friend!! :thumbsup:

Oh, and the rest of the room is looking great too!! :cheers:

[syborg tt]

06-29-09 Update - Belly Pan is going on for the last time

Good Morning All,

All of the belly pans are painted and ready to be installed for the final time.

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_GT_6.jpg

I just hate covering up this back half.
All of the detail is going to be hidden

http://www.syborgtwinturbo.com/albums/Build/2008_08_26_Josh_15.jpg

Not sure if anyone remembers.
But tucked under the Passenger Side of the Bed is the Factory Charcoal Can.
We've installed these on a few projects and no more gas smell.

http://www.syborgtwinturbo.com/albums/Build/2006_10_14_008.jpg

Starting to look like something

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_GT_6.jpg

http://www.syborgtwinturbo.com/albums/Build/2008_11_27_KD_GT_8.jpg

Closing off the wheel opening

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_003.jpg

I'm such a tease you have to wait to see it on the ground for final pics.

[syborg tt]

I love the hand drawn artwork hanging above the bench....way to keep it real my friend!! :thumbsup:

My Favorite Part of the Garage

[GMracer]

looks sick, I've been working on some ideas, of maybe running a belly pan also.

[SickSpeedMonte]

I'm such a tease you have to wait to see it on the ground for final pics.

:willy:

Wow... it took me 4 days to get through this thread, and I thought for sure I was going to see a finished truck at the end. This build is absolutely incredible! I have never seen so much attention to detail go into a build and then been able to follow along every step via the internet! Great job, and keep us updated! :cheers:

[ccracin]

Marty,

Looking absolutely spot on! Is Kenny on his way to Columbus with it? C'mon the people want to know.:thumbsup: If not are you still going? It would be great to BS a while.
We'll be there Thursday.

Later,

[syborg tt]

07-15-09 Update - Turbos hit the Road Again

Good Afternoon All,

Well, it looks like the turbo's are back on the road again.

Last time they had over 2,000 miles on them before we ever started the truck
and it looks like they are going to get a few more.

Turbo are off the truck and ready to get packed up and shipped to Rockford Racecraft.
The good news is this time it's just the Exhaust Housings.

http://www.syborgtwinturbo.com/albums/Build/2009_04_11_KD_GT_1.jpg

http://www.syborgtwinturbo.com/albums/Renderings/RR_Logo.jpg

Here's a good picture of Josh with his hands in the sandblasting cabinet.

http://www.syborgtwinturbo.com/albums/Build/2009_04_14_RR_1.jpg

Yep, you guessed it the Turbo Housings & Wastegates are being stripped.

http://www.syborgtwinturbo.com/albums/Build/2009_04_14_RR_4.jpg

Since we change the theme / color combination of the engine compartment.
The housings need to be Hi-Temp coated in black.

http://www.syborgtwinturbo.com/albums/Build/2009_04_15_RR_1.jpg

Can't wait to see them all put back together.

New Product Sponsor
www.designengineering.com

http://www.syborgtwinturbo.com/albums/Build/DEI_Design_Engineering_Inc.jpg

[tones2SS]

Looks good in black!!:thumbsup: :cheers:

[Evan Iroc-Z]

Having been raised in Rockford it is nice to see something good come from that area.

The turbos look fantastic in black.

[syborg tt]

Good Evening All,

Sorry I have busy at work and haven't had much free time for posting updates.
Not to worry I spent the last hour setting up the next 12 posts.

Just Checking to see what the door panels look like on the truck.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_015.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_035.jpg

Man that's a whole-lotta Autometer.

http://www.syborgtwinturbo.com/albums/Build/Autometer.jpg

Trust me they look awesome when they are all on.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_036.jpg

Quick shot of the graphics.
Bob Thrash & the guy's at Kenny Davis Hot Rods went above and beyond with there attention to details.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_042.jpg

Coming Really Really Soon - No Really
http://www.mac-ink.com/

http://www.syborgtwinturbo.com/albums/Build/2009_07_07_SyborgTT.jpg

www.maxjaxusa.com

[awr68]

Nice shirt! I think I NEED one!! :cheers:

[OLDFLM]

I want a shirt too my friend!!! Tony does great work! :thumbsup:

[syborg tt]

Good Morning All,

Yep, another post back to back.

The motor is back together and the headers are all brushed and look awesome.
I want to thank Race Proven Motors for setting us up with the primary's and Stainless works for all of the tubing.

But in the end the Credit goes to Dave at Comp Fab for building the final headers.
http://www.compfab.com http://www.raceprovenmotors.com http://www.stainlessworks.net

I'm much happier with the look of the exhaust now.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_018.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_025.jpg


Can't forget Kenny from Kenny Davis Hot Rods. He is the one with the mad brushing skills
http://www.kdhotrods.com

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_024.jpg

and the guy's at Rockford Racecraft, they did all of the High Temp Coating on the Exhaust housings.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_026.jpg

Switching to the Power Steering pump from DSE has real cleaned up this area of the engine compartment.
Now I am going to have to clean up the frame -- can you say dusty.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_046.jpg

http://www.maxjaxusa.com

[bentfab]

Marty,

Looks bitchen !!! One problem though. You need some hardline on those turbo feeds. Just food for thought. Not that I would'nt notice something like that. LOL !!

[syborg tt]

Marty,

Looks bitchen !!! One problem though. You need some hardline on those turbo feeds. Just food for thought. Not that I would'nt notice something like that. LOL !!

Okay so when are you going to be in Chicago ??

[bentfab]

I was there once about 12 years ago. Soooo I'm not sure when I'll be there next.

[HWY Nova]

I was there once about 12 years ago. Soooo I'm not sure when I'll be there next.

ROAD TRIP!!!!!

[bentfab]

ROAD TRIP!!!!!

Speaking of road trip ? Where the hella you been ? I need some cantilever thing-a-ma-gigs.

[syborg tt]

I was there once about 12 years ago. Soooo I'm not sure when I'll be there next.


sounds like it's time for a ROad Trip

[badmatt]

sounds like it's time for a ROad Trip

If bent fab comes down, Marty ill hop in my GTO so fast LOLOLOL

[bentfab]

Why certainly. Let me just throw my tools in my little black bag of magic tricks and ala-kazam, snap-my-fingers,click my heels, and two shakes of a lambs tail I'll be there. If I had your guys money (Eric and Marty) I would burn mine and catch the next plain out-a here. But unfortunately I have a wife new baby boy and a shop to run. Sooo I think Marty needs to make a road trip? It would be a perfect break-in for the truck. Let me know what ya-all think?

[syborg tt]

Why certainly. Let me just throw my tools in my little black bag of magic tricks and ala-kazam, snap-my-fingers,click my heels, and two shakes of a lambs tail I'll be there. If I had your guys money (Eric and Marty) I would burn mine and catch the next plain out-a here. But unfortunately I have a wife new baby boy and a shop to run. Sooo I think Marty needs to make a road trip? It would be a perfect break-in for the truck. Let me know what ya-all think?

LOL - Mark your the best.

ps - Kudo's on the new baby that is awesome.

[badmatt]

LOL - Mark your the best.

ps - Kudo's on the new baby that is awesome.

Ill pay for half the fuel.... if I ride shot gun...

[bentfab]

Ill pay for half the fuel.... if I ride shot gun...

Marty,
How can you back out of that deal ? See if Matt will throw in an oil change also? 3,000 mile road trip for half the cost. One up for Matt.:beavis:

[syborg tt]

Hi All,

I have good news.
Tony at Mac-Ink is ready to start taking orders today.

So click away.
http://www.mac-ink.com/shirts/SyborgTT.html

http://www.mac-ink.com/shirts/SyborgTT.jpg

http://www.maxjaxusa.com

[HWY Nova]

Hi All,

I have good news.
Tony at Mac-Ink is ready to start taking orders today.



Are you getting part of the proceeds?


--Eric

[syborg tt]

Are you getting part of the proceeds?

--Eric

Nope - all goes to Tony. He was kind enough to put the shirts together and ship them out.

[syborg tt]

Good Afternoon All,

I want to thanks the folks at Clean Seal for helping us find the perfect underhood weather-stripping
Kerri was awesome to work with and went above and beyond.

http://www.syborgtwinturbo.com/albums/Build/Clean_Seal.gif

www.cleanseal.com

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_021_Clean_Seal.jpg

Kenny getting the engine ready to fire back up.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_007.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_008.jpg

Nope it's not black -- looks good doesn't it.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_010.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_027.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_028.jpg

[GMracer]

Looks good Marty! :thumbsup:

[badmatt]

looks like its anodized :) looks good Marty!

[customcam]

Marty we need a Vid for your first Power take offf! :woot:

[HWY Nova]

Looking great Marty!!!!! I can not wait until my project is this far along.


--Eric

[syborg tt]

Hi Guys,

It's Friday and I am just finding a free moment to do a quick Update.

Since the nose came off the truck.
We decided the AC Condenser would look better in the darker color.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_049.jpg

Kenny modified the AC Condenser brackets so they would clear the grille.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_050.jpg

These even a horn for those pesky drivers.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_054.jpg

More to come over the weekend.

[tones2SS]

Man, I can't believe the detail in this bad boy.
Looks good Marty!:cheers:

[waynieZ]

Awesome work !

[syborg tt]

Good Morning,

The motor is back together and the color change has made a big difference.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_022.jpg

Now that the motor is back together we contacted Nolan at www.campbellautomotive.com

http://www.syborgtwinturbo.com/albums/Build/caracing.jpg

Nolan wrote us a complete Engine & 4l80e tranny tune for the Big Stuff 3.

http://www.syborgtwinturbo.com/albums/Build/big_stuff_3.jpg

If your looking for someone to help you with your Big Stuff 3 tune make sure you call Campbell Automotive in Canada.
They went above and beyond to help us with the Truck.
These guy's are top notch !!

Kenny installed the program that Nolan sent us and the motor fired right up - First Try.
WOW !!

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_066.jpg

Sorry I can't blame Kenny for the poor Quality of this picture as I am the one who took the picture.

http://www.syborgtwinturbo.com/albums/Build/2009_04_18_KD_GT_072.jpg

Without the help of friends I am certain this truck could have never been built to this level.
Nolan and Campbell Automotive in Canada -- Thanks again you are the best.

Call them is you need help with any of your engine management problems. It could be the best call you make.
1-780-452-3535

[syborg tt]

Below is the link to it running with the original tune.

The tune from Nolan happened a few day's later.

http://www.youtube.com/watch?v=QE7WZMpnWW8

[customcam]

Wow, man does that sound awesome :hail:
That Engine bay is killer...

[tones2SS]

Wow, man does that sound awesome :hail:
That Engine bay is killer...

You said it brother. Talk about a "clean" look!!:cheers:

[nvr2fst]

Marty,
After all this time I have one question. Did your shop storage rate at Kennys surpass the cost of the build. LOL Im sure Kenny looking forward to seeing this done. Truck looks and sounds killer on the vid.
Dave

[70rs]

VERY COOL Marty!!:thumbsup:

I am very happy for you to have it at this point now. It won't be long till it's on the road huh?:cheers:

[syborg tt]

Marty,
After all this time I have one question. Did your shop storage rate at Kennys surpass the cost of the build. LOL Im sure Kenny looking forward to seeing this done. Truck looks and sounds killer on the vid.
Dave


lol I agree I am certain he want's the truck out of there.

[65 347]

Sounds great! Just one step closer.

[syborg tt]

Good Evening,

Okay so I've been a slacker on the updates.
We have been swamped at work - which is a good thing.

So the truck is on the ground and all of the cladding is on the truck.

http://www.syborgtwinturbo.com/albums/Build/2009_06_16_KD_0.jpg

Yes, this is aired out.

http://www.syborgtwinturbo.com/albums/Build/2009_06_16_KD_1.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_06_16_KD_2.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_06_16_KD_3.jpg

[badmatt]

WHOO! looks friggen redic!

[awr68]

Marty, the truck really looks great! Do you have any plans for a bed cover?

[syborg tt]

Marty, the truck really looks great! Do you have any plans for a bed cover?


We do have a custom cover that was made by Design automotive prior to them going out of business. However with all of the modifications to the bed's with I am not sure if it will actually fit.

[texas56]

WOW! Truck looks awesome! Great Job!:thumbsup:

[syborg tt]

Hi All,

I've had a bunch of request for a close up of the exhaust tips.

http://www.syborgtwinturbo.com/albums/Build/2009_06_16_KD_Exhaust_Tip_1.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_06_16_KD_Exhaust_Tip_3.jpg

[Blake Foster]

looks like it's getting close!!!! are ya gettin excited!!!

[customcam]

What a machine :hail:
Marty can we see some close ups of the engine bay
That rear shot is :bow:

[tones2SS]

Looks awesome.
Nice color scheme as well.:thumbsup:

[RECOVERY ROOM]

It is getting closer,Nice colors:thumbsup:

[syborg tt]

looks like it's getting close!!!! are ya gettin excited!!!

I know you understand - I just can't wait to see it home again.

[waynieZ]

Truck looks awesome.

[GregWeld]

Marty -- Love it!!

[awr68]

We do have a custom cover that was made by Design automotive prior to them going out of business. However with all of the modifications to the bed's with I am not sure if it will actually fit.

Let's hope so....I think it would really finish off the exterior! :thumbsup:

[syborg tt]

Let's hope so....I think it would really finish off the exterior! :thumbsup:


Yep, the black of the bed cover and the hood are suppose to tie it all together. If not the bed itself will do the job.

[syborg tt]

Happy Friday,

Truck is heading outside for it's final wash before heading to the Recovery Room.

I am certain that Tracy is going to love this truck.

http://www.syborgtwinturbo.com/albums/Build/recoveryroom_400.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_06_22_KD_GT_21.jpg

http://www.syborgtwinturbo.com/albums/Build/HWI_Motorsports.jpg

Mr. Morgan Wood Duffy, CIC, LIA - President
HWI Motorsports • a division of Hayden Wood Insurance Agency, Inc.
30 Turnpike Road • Suite 5 • Southborough, Massachusetts 01772
Office: (508)229-8700 • Mobile: (508)904-0508 • Fax: (508)229-8702
http://www.hwimotorsports.com • http://www.haydenwood.com

[HWY Nova]

Truck is heading outside for it's final wash before heading to the Recovery Room.

I am certain that Tracy is going to love this truck.



Tracy may love it, just don't be late! He will not tolerate late arrivals.


--Eric

[RECOVERY ROOM]

There is no pressure on this one,The goal is to get it and put a look together that will finish it with style.Marty and Kenny have keep me informed on the status,There right on time:yes: That little truck might look funny with the street rod's and muscle cars all around the shop...lol

[HWY Nova]

That little truck might look funny with the street rod's and muscle cars all around the shop...lol




He said "little truck".............


--Eric

[customcam]

The icing on the cake

[GMracer]

Wait it's in MA now? Why didn't I know this... I want to see it.

[RECOVERY ROOM]

Sorry... I am in Nebr.

[RECOVERY ROOM]

The icing on the cake

Leather Icing:thumbsup:

[GMracer]

I knew you weren't in MA, but HWi says MA

[tones2SS]

I knew you weren't in MA, but HWi says MA

That is Morgan's Insurance company for sports cars/muscle cars.
It's in Shrewsbury, MA. He is a member here and on pro-touring.com (I think he spends most of his time on pro-touring.com.) I've met him and hung out with him a couple of times now at the Summer Nats in Worcester, MA.

[Blake Foster]

hey Marty
your little truck is going to have to wait till my stuff is done!!!
i know Tracy is working on my stuff............ he told me so.........

:drama:

[syborg tt]

That is Morgan's Insurance company for sports cars/muscle cars.
It's in Shrewsbury, MA. He is a member here and on pro-touring.com (I think he spends most of his time on pro-touring.com.) I've met him and hung out with him a couple of times now at the Summer Nats in Worcester, MA.

Yep, Morgan is a great guy and he's getting into the Custom and modified car insurance. What helps is he's a real car guy and he understands that most of us actually want to drive our cars and not park them and wait for a show or a Friday night cruise night.

[GMracer]

Good to know, I'll keep him in mind.

[syborg tt]

Good Afternoon all,

Well, it's finally outside.

http://www.syborgtwinturbo.com/albums/Build/2009_07_08_KD_GT_6.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_07_08_KD_GT_7.jpg

We still need to change the clamps under the hood and some other little stuff.
But dang is it close.

http://www.syborgtwinturbo.com/albums/Build/2009_07_08_KD_GT_17.jpg

The radiator cover changed colors again. It now matches the core support.

http://www.syborgtwinturbo.com/albums/Build/2009_07_08_KD_GT_20.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_07_08_KD_GT_66.jpg

[GMracer]

Man that is sick, but I must admit I'm surprised you didn't move the cab back instead of the bed forward to close to gap and help center the front wheel. I see a lot of s10 guys doing that.

But damn under the hood is sooooo clean.

[GregWeld]

:thumbsup: :thumbsup: Really kool Marty... really kool....

[camaro2nv]

Unreal! Great job!

[Joel145]

Man that is sick, but I must admit I'm surprised you didn't move the cab back instead of the bed forward to close to gap and help center the front wheel. I see a lot of s10 guys doing that.

But damn under the hood is sooooo clean.

Man, don't tell him that. They're capable of tearing the whole thing apart again to get that done. j/k:lol:

Looks awesome Marty, I got say your engine bay is on my top 5 favorite.

[customcam]

Wow! What a build mate
Marty have any close ups of the Vcovers? That bay has to be 1 of the best Twin Turbo looking set ups imo :yes:

[Lenie]

Marty, that's some truck. Well worth the wait. Very nicely done. Congrats.

[syborg tt]

Wow! What a build mate
Marty have any close ups of the Vcovers? That bay has to be 1 of the best Twin Turbo looking set ups imo :yes:

Thank you - I am amazed at how nice it turned out. It almost seems empty in there. Like it needs more stuff.

I just can't wait to see what Tracy does with the Interior.

[kennyd]

Wow! What a build mate
Marty have any close ups of the Vcovers? That bay has to be 1 of the best Twin Turbo looking set ups imo :yes:

no close ups of the valve covers , i made them ship them back so i can redo them . i am not happy with the paint on them .

[Garage Dog 65]

Nice job Kenny and crew !!! Another great project delivered. What's next ??

You must be stoked to know it's coming home soon Marty ! Got the garage finished and polished up for her ?? Post that tire smoking video soon please !!

Looking forward to seeing the truck in person guys :thumbsup:

Jim

[tones2SS]

WOW!!! Looks killer. That is one nice truck.
Like Nick said about the engine bay, That is very clean looking!!:thumbsup: :cheers: :cheers:

[kennyd]

Nice job Kenny and crew !!! Another great project delivered. What's next ??

Jim


the next big build is a 72 cuda for james brown ( not the singer ) ( the CBS football host ) . and finish a 55 nomad ,a 57 chevy post and a 33 cabroliet for street rod of the year 2010 contender hopefully

[tones2SS]

the next big build is a 72 cuda for james brown ( not the singer ) ( the CBS football host ) . and finish a 55 nomad ,a 57 chevy post and a 33 cabroliet for street rod of the year 2010 contender hopefully

WOW! Very cool. Are you going to keep us posted on those builds as well?
THANKS!:thumbsup: :cheers:

[customcam]

What a Journey, Love Tracys work :thumbsup:
Kenny good to see your doing well :) oh yeah and post some pics of the builds will ya lol

[syborg tt]

Good Evening All,

The truck is at it's new home.

http://www.syborgtwinturbo.com/albums/Build/recoveryroom_401.jpg

Kenny is finally happy the truck and it's parts have left his shop.

I can't wait to get the truck home and actually turn on the Stereo and here how the Kicker stuff sounds

http://www.syborgtwinturbo.com/albums/Build/2009_07_26_Recovery_Room_1.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_07_26_Recovery_Room_4.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_07_26_Recovery_Room_5.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_08_02_Recovery_Room_6.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_08_02_Recovery_Room_8.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_08_02_Recovery_Room_9.jpg

I am not sure if you guys have noticed the Picture Quality is much better.
Tracy can actually operate a camera.

Sorry Kenny.

[awr68]

Nice! That's certainly a step in the right direction!! It won't be long now!! I lost track....how long was it at Kenny's?

[G-Body]

I just never get tired of looking at photos of this sweet lil truck amazing style and detail.

[syborg tt]

Nice! That's certainly a step in the right direction!! It won't be long now!! I lost track....how long was it at Kenny's?

I think it was at Kenny's 2 years. It would have been there less time if I had more money and then of course there was that little accident of his last Dec where he lost 2/3 of his skull.

But it's all good.

In the end the truck started 05 05 05 and there has never been a hurry to finish the truck so when it's done it's done.

[Garage Dog 65]

Is Beautifull !

Hey Tracy, how much material does it take to do a mini-truck - 1 nauga and half a chinchilla for the accents ?? :D

[awr68]

there has never been a hurry to finish the truck so when it's done it's done.

That's a great attatude to have when building a highly detailed project as you are! Have you started in on that F-Body yet?

[RECOVERY ROOM]

Is Beautifull !

Hey Tracy, how much material does it take to do a mini-truck - 1 nauga and half a chinchilla for the accents ?? :D

Very small cows:rofl:

[Ketzer]

Very small cows:rofl:

Dwar...Midge..."Size challenged" bovines? Cowlets?


Amazing project regardless of the time it took to get here. Congrats, Marty!
(I think thats actually a normal amount of time for us regular folk to get a project done. We get spoiled seeing how fast some of these projects get finished when money is no object)


Jeff-

[texas56]

Hopefully Tracy updates us with build pics of the interior! I cant wait to see this thing. VERY COOL truck!:thumbsup: :hail: :bow: :woot: :cheers:

[syborg tt]

Good Afternoon all,

Just a quick Update.

Once again I've had the pleasure of working with Simon.
This poster is all about the Motor & Tranny.

http://www.syborgtwinturbo.com/albums/Merchandise/Poster_3_480_x_720.jpg

[syborg tt]

Hopefully Tracy updates us with build pics of the interior! I cant wait to see this thing. VERY COOL truck!:thumbsup: :hail: :bow: :woot: :cheers:


At least we know his picture taking skills are better then Kenny's

[customcam]

I cant get enuff of this car truck mini truck :D
Marty i want one of those posters
Tracey is multi talented, more pics please

[syborg tt]

Good Morning All,

Quick Teaser

http://www.syborgtwinturbo.com/albums/Build/Hood_Pins_Front2.jpg

Before the Truck left Kenny's
Kenny Install the Billet Hood Pins from Hoodpins.net

http://www.syborgtwinturbo.com/albums/Build/2009_07_08_KD_GT_69.jpg

http://www.syborgtwinturbo.com/albums/Build/Hood_Pins_Back3.jpg

[syborg tt]

Good Morning All,

Well, let's just say I am behind a little bit on my updates.
Tracy has been kicking but on the interior.

First thing First - you gotta have the blue tape and lot's of it.

http://www.syborgtwinturbo.com/albums/Build/2009_08_19_Josh_Mishler_27.jpg

Yep, Kicker is going in.
YAHOO !!!!

http://www.syborgtwinturbo.com/albums/Build/2009_04_14_Kicker_002.jpg

Check out the Depth of these and these are the only 6 1/2" Speakers.

http://www.syborgtwinturbo.com/albums/Build/2009_04_14_Kicker_004.jpg

The Dash is back out and wait till you see what you Tracy has in mindfor the dash.

http://www.syborgtwinturbo.com/albums/Build/2009_08_19_Josh_Mishler_48.jpg

and finally we end with the power.

http://www.syborgtwinturbo.com/albums/Build/2009_09_09_Recovery_Room_2840.jpg

[customcam]

Love those stripes separating the colors :thumbsup:
:bow:

[syborg tt]

Good Morning All,

Big Change a Coming.
Check out what the Guy's at the Recovery room did to the dash!!!

http://www.syborgtwinturbo.com/albums/Build/recoveryroom_402.jpg

So here is my original Dash Surround .......

http://www.syborgtwinturbo.com/albums/Build/2009_09_24_Recovery_Room_2854.jpg

and this is what happens when you put full trust in your interior shop.

http://www.syborgtwinturbo.com/albums/Build/2009_09_27_Recovery_Room_2887.jpg

He claims it just fell apart. Of course Tracy said that with a big grin on his face.

http://www.syborgtwinturbo.com/albums/Build/2009_09_27_Recovery_Room_2889.jpg

Current status of the dash.

http://www.syborgtwinturbo.com/albums/Build/2009_09_28_Recovery_Room_2891.jpg

I can't wait to show you the trick parts Ride Tech is now making for interiors
and wait till you see what Tracy at the Recovery Room is planning on doing with them.

http://www.ridetech.com

I bet I've peaked your curiosity.

http://www.syborgtwinturbo.com/albums/Build/Ride_Tech_Logo_2009.jpg

[RECOVERY ROOM]

I just didn't think the square lines on the dash were going to work with what I have in mind.It was built very well,I'm thinking of something with a lot more curve and shape...We are going to use some of RIDE TECH products on the interior,This is the first time I have tried there interior parts,Should work real well ,Thanks TONY(ride tech)

[waynieZ]

Its turning out awesome !

[tones2SS]

Every time I see an update, this truck continues to get better and better.
ENJOY!!!:thumbsup:

[J2SpeedandCustom]

I just didn't think the square lines on the dash were going to work with what I have in mind.It was built very well,I'm thinking of something with a lot more curve and shape...

I knew you had to put the Tracy swoop in there somewhere! :lol:

[RECOVERY ROOM]

It will be on the new gauge pod sides..haha

[COYBILT]

is this car going to be at SEMA this year?

[syborg tt]

Good Morning All,

Quick Picture of the new Billet Seat Grommets that Ride Tech now offers.

http://www.ridetech.com/catalog/Precision_Coachworks_Products-2488-1.html

Make sure you click the link to see all of there new cool stuff.

http://www.syborgtwinturbo.com/albums/Build/2009_09_28_Recovery_Room_2893.jpg

Nice Close up and the part number for the grommets.

http://www.syborgtwinturbo.com/albums/Build/2009_09_28_Recovery_Room_2894.jpg

Now back to our regular schedule updates from Mr. Weaver.

Door Panel Progress

http://www.syborgtwinturbo.com/albums/Build/2009_09_30_Recovery_Room_2896.jpg

Dash Progress

http://www.syborgtwinturbo.com/albums/Build/2009_10_01_Recovery_Room_2901.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_10_04_Recovery_Room_2903.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_10_04_Recovery_Room_2904.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_10_04_Recovery_Room_2906.jpg

[GregWeld]

Okay Marty -- sorry to be so ignorant... :>)

WTF are "billet seat grommets" ??

:question: :question:

[syborg tt]

Okay Marty -- sorry to be so ignorant... :>)

WTF are "billet seat grommets" ??

:question: :question:

LOL - you awesome - just think Ford GT

http://www.garagescene.net/gallery2/d/212-1/2008+GG+Columbus+089.JPG

http://www.garagescene.net/gallery2/d/222-1/2008+GG+Columbus+094.JPG

[GregWeld]

Think SPICOLLI....


DUUUUUDE !!


Okay -- got it! Thanks!! Sometimes I'm so dense.... :>)

[70rs]

Good thing theres pictures huh Greg?:D

[GregWeld]

Good thing theres pictures huh Greg?:D

I'm thinkin' that's a "gotcha" huh??
:lol:

Seriously -- I'm thinking something to make the seat look better where it bolts to the floor -- and for the life of me -- I'm thinkin' "okay - that's just ridiculous"!!!

:rofl: :rofl:

But I'm tough! I can take the heat...

[65 347]

Okay Marty -- sorry to be so ignorant... :>)

WTF are "billet seat grommets" ??

:question: :question:

Greg, Don't feel bad, I was thinking the same thing.

[syborg tt]

Greg, Don't feel bad, I was thinking the same thing.

yep - see it's peaked your interest.

I hope to show you some more pics next week.

[J2SpeedandCustom]

Oh you mean "leg fryers"! So when the car is out in the sun and you go to get in the seat with shorts on you fry the backs of your legs... :lol:

[syborg tt]

Oh you mean "leg fryers"! So when the car is out in the sun and you go to get in the seat with shorts on you fry the backs of your legs... :lol:


it's a sacrafice I am willing to make.

[GregWeld]

Oh you mean "leg fryers"! So when the car is out in the sun and you go to get in the seat with shorts on you fry the backs of your legs... :lol:


YEAH BUT!... They make such a kool pattern!!!

:woot:

[GregWeld]

it's a sacrafice I am willing to make.

Nothing the "limo tint" on the windows won't take care of Marty... :unibrow:

[syborg tt]

YEAH BUT!... They make such a kool pattern!!!

:woot:

lol - pardon the pun

[RECOVERY ROOM]

I am using them in the back of the seat and the doors,

[RECOVERY ROOM]

YEAH BUT!... They make such a kool pattern!!!

:woot:

Kinda like waffle ass after sitting on metal lawn chairs

[customcam]

:wow:
How do you Stitch them in Tw
Wasnt there a billet face for the gauges somewere? i dont want to go through the whole thread lol

[Sales@Dutchboys]

looking good Marty, Whats next? lol:)

Paul

[70rs]

[QUOTE=GregWeld;241041]I'm thinkin' that's a "gotcha" huh??
:lol:

Yup. It was. All in good fun.:rofl:


I think those are going to look good in there.

[COYBILT]

it was nice meeting you at SEMA this year and sorry I went on my rant about Midwest company's. I have just been shafted by a couple of them, so I was venting a little bit.

[syborg tt]

Good Morning & Happy Turkey Day

I know it's been a long time since my last post. But the wait will be worth it.

http://www.syborgtwinturbo.com/albums/Build/DEI_Design_Engineering.jpg

New! Titanium Turbo Shield
Custom fit T3 & T4 Titanium Turbo Shields with LR Technology provide the ultimate means of reducing turbo lag while serving as
a superior heat barrier - shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.

Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to
1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler
air intake temperature and a boost in horsepower!

Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated
silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.

-Anchoring hooks are incorporated to secure shield
-Each Kit Includes: Turbo Shield, 2” x 15 ft roll of Titanium down pipe wrap,
two 14” stainless steel zip ties & fastening wire
-Shields are also sold separately

http://www.syborgtwinturbo.com/albums/Build/2009_08_02_Recovery_Room_3.jpg

We accidently ordered the wrong size but Kenny had to see what they looked like on the truck.

http://www.syborgtwinturbo.com/albums/Build/2009_08_19_Josh_Mishler_10.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_08_19_Josh_Mishler_13.jpg

http://www.syborgtwinturbo.com/albums/Build/2009_08_19_Josh_Mishler_17.jpg

http://www.syborgtwinturbo.com/albums/Build/DEI_Logo.jpg

okay my favorite net only DEI Image

http://www.syborgtwinturbo.com/albums/Build/DEI_Model_640.jpg

[syborg tt]

it was nice meeting you at SEMA this year and sorry I went on my rant about Midwest company's. I have just been shafted by a couple of them, so I was venting a little bit.

Good meeting you also. I really love your car.

[Kendall Burleson]

It looking good were is the unvailing going to be at?

[syborg tt]

It looking good were is the unvailing going to be at?

I don't know - haven't even set a completion date yet. :lol:

[Garage Dog 65]

That color scheme change under the hood really made a difference Marty. I know it was a PIA sanding and redoing it several times Kenny - but man it looks great ! :thumbsup:

Jim

[awr68]

Sweet truck Marty! Looks like it's getting close? :thumbsup:

[waynieZ]

Awesome craftsmenship. Beautiful truck.

[T-Type]

this thing looks better and better everytime i see the pics. :thumbsup:

[nvr2fst]

Baddest little truck of all time IMO, the slight color change is for the better.
And that picture of your wife is awesome!

[customcam]

They have a Carbon fibre look to them