...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
Reload this Page Any cool 2nd Camaros out there? Or third gens?
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 05-17-2007, 02:57 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
  
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default Any cool 2nd Camaros out there? Or third gens?
For Camaro Performers magazine..

Looking for cars in the SoCal or willing to come to for features. We have tons of first gens but not so much on the other stuff.

Post up on here or email me at [email protected]
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #2  
Old 05-17-2007, 03:16 PM
Sales@Dutchboys's Avatar
Sales@Dutchboys Sales@Dutchboys is offline
Lateral-g Supporting Vendor
  
Join Date: Jan 2006
Posts: 2,163
Thanks: 3
Thanked 35 Times in 22 Posts
Default
I am think of one but its not done yet....lol
__________________
dutchboyshotrods.com
269-823-2967

https://www.facebook.com/Dutchboyshotrods
Reply With Quote
  #3  
Old 05-17-2007, 03:18 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
  
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default
It helps if it's done
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #4  
Old 05-17-2007, 05:25 PM
silver63c10's Avatar
silver63c10 silver63c10 is offline
Senior Member
  
Join Date: May 2007
Location: Carrollton, TX
Posts: 221
Thanks: 0
Thanked 11 Times in 3 Posts
Default
Working on one...but yeah, it's a little far from complete..



It's cool that you're looking for them, though, not a whole lot of love for the 2nd gens, and there's definitely some nice ones around.
__________________
Duston
Follow along on the insta
Reply With Quote
  #5  
Old 05-17-2007, 06:21 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,333
Thanks: 7,176
Thanked 2,197 Times in 1,014 Posts
Default
Steve,

did you post this on the second gen board?

http://www.nastyz28.com/forum/index.php
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #6  
Old 05-17-2007, 06:33 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
  
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default
Quote:
Originally Posted by camcojb
Steve,

did you post this on the second gen board?

http://www.nastyz28.com/forum/index.php
No.. that was the editor of the magazine I bet.. I have too many boards to post on as it is.. lol
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #7  
Old 05-17-2007, 07:31 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,333
Thanks: 7,176
Thanked 2,197 Times in 1,014 Posts
Default
Quote:
Originally Posted by Steve1968LS2
No.. that was the editor of the magazine I bet.. I have too many boards to post on as it is.. lol
Nobody posted about it there, I meant you should try, second gen is all they do.

Want me to make a post for you?

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 10:26 PM.
Contact Us - Lateral-g.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net