Time to start selling off the unused parts from the Penny build..

[Steve1968LS2]

First up is a set of COMP Cams Magnum roller rockers for LSx engines. 1.75 ratio part number 13755-KIT

Here's a link : http://store.summitracing.com/partde...T&autoview=sku

Sells at Summit for over $500.. my price is $320 shipped (the box is heavy) and these are brand new in the box and have never been opened. Still shrink wrapped.

-----------------------------------

6.5 pound Meziere billet flex plate - LS1 - 168 tooth - part number FP319

The best money can buy.. or as Meziere says: Made from one piece of very strong alloy steel, this flexplate is made to last. The starter driven gear is machined as the part is made. There are no welds to break. There can be no warping or mis-shaping of the plate. This makes the Meziere True Billet Flexplate the most concentric, straightest and strongest flexplate money can buy. With the Meziere Flex plate there is no need to worry about breaking a plate. All Meziere flexplates are SFI 29.1 certified.

Priced online at almost $400 ( http://www.byunspeed.com/product_inf...d738cbd5ed0493 )

My price, new in box and never opened? How about $275 shipped!

-----------------------

'99+ vette fuel regulator and filter. From Street and Performance with the fittings to run to AN. They chage some goofy price like $150 for the kit. My price is $55 shipped with the fittings. SOLD!!!!!!!!!!!!

----------------------

S&P fuel lines. This is the line LS2 engine with the single feed and passengers side. The part number says 10164. See the bottom of page 85 of the S&P catalog ( www.hotrodlane.cc )
This is to connect to a factory fuel rail and run through a set of fuel rail covers. Stainless hardline and braided hose with 6AN fitting. Includes second line for return off the back of the rail. Their price is $150 and my price is $50 shipped. I will see if I can get a pic. SOLD!!!!!!!!!!!!

----------------------

'67 Camaro tail lights - RS

These are the ones that used to be on Penny. They are in EXCELLENT shape. At Rick's First Gen they run $175 for the pair plus $40 for the lenses.

http://www.rickscamaros.com/cgi-loca...913+1173376889

My blow out price? $90 shipped for both housings, the lenses and the gaskets. SOLD!!!!!!!!!!!!

---------------------

Local sale only: 4" Harwood fiberglass cowl hood --- $200

--------------------

Barry Grant mighty sumo fuel pump (170041) -- Never used, just been sitting on a shelf for a year. Fuel injected applications up to 750hp. It's at JEG's for $460...... My price? $260 shipped.

-------------------

SPAL door lock solenoid kit. Part number 37000148

http://www.thebettersource.com/servl...prod=1103&dw=1

$48 is the online price.. buy it from me and it's $25 shipped. SOLD!!!!!!!!!!!!!!

-------------------

Autometer fuel gauge - part number 4317

This one: http://store.summitracing.com/partde...5&autoview=sku

$42 from Summit means it's only $20 shipped from me. Never installed and still in the box. Heck I will even throw in the bezel to tilt it to the side. SOLD!!!!!!!

------------------

HRE billet center caps. Ditch the cheap ass plastic ones and get some "made by HRE" billet caps. HRE sells them for some stupid price like $50 each. My price is $50 for ALL FOUR. These have been polish and no longer have the HRE logo on them. They are secured by set screws.

------------------


I'm sure there will be more as I dig through the garage. My responses will be slow next week (3/9-3/16) since I will be on vacation and sporadically checking email. Let me know if you have any questions and thanks!

[Steve1968LS2]

Open to offers on the remaining stuff.. I need these parts GONE!!!