...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-21-2006, 02:35 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,251
Thanks: 6,733
Thanked 2,084 Times in 952 Posts
Default Looking for a good body guy in northern California

got the Malitude stripped and unfortunately the car was not stripped previously by Art in Motion like they said they did. The old red paint job was underneath from when Charley had the car.

The car is pretty straight, no rust. But some of the metal repairs done previously are going to require a good bondo guy. I want to paint the car myself, and I can do body work, but I'd rather farm this out.

I'm looking for someone who has the time to get it knocked out fast as it's going on Power Tour. It also has a magazine shoot or two planned so this person will get some print from that. I'm just looking for someone to get it ready for paint, but not paint it.

Any ideas? I know, bodywork is a toughie, finding a good person and getting it out in a timely manner is almost impossible. Just taking a shot here.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #2  
Old 11-21-2006, 05:09 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Bring it down here.. I know JUST the place

It's not THAT far.. lol.. I can supervise thier work for ya..
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #3  
Old 11-21-2006, 05:11 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,251
Thanks: 6,733
Thanked 2,084 Times in 952 Posts
Default

Quote:
Originally Posted by Steve1968LS2
Bring it down here.. I know JUST the place

It's not THAT far.. lol.. I can supervise thier work for ya..
actually I could send it down there too. But would they do it if they aren't painting it? Contact info?

Thanks Steve, much appreciated.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #4  
Old 11-21-2006, 05:12 PM
Kris Horton's Avatar
Kris Horton Kris Horton is offline
Senior Member
 
Join Date: Jul 2004
Location: SoCal
Posts: 454
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Steve's right, there's something to be said about some of the talent here in SoCal. But for every paint shop that's awesome, there's 100 that totally suck.
__________________
Kris Horton
www.carsbykris.com
Reply With Quote
  #5  
Old 11-21-2006, 07:03 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by camcojb
actually I could send it down there too. But would they do it if they aren't painting it? Contact info?

Thanks Steve, much appreciated.

Jody
They would if I asked nicely

www.bestofshowcoachworks.com
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #6  
Old 11-21-2006, 07:03 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by Kris Horton
Steve's right, there's something to be said about some of the talent here in SoCal. But for every paint shop that's awesome, there's 100 that totally suck.
Aint that the truth.. most are AWFUL.. which is why I am so happy I found an honest one..
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #7  
Old 11-21-2006, 07:36 PM
JamesJ JamesJ is offline
Senior Member
 
Join Date: Jan 2005
Location: Houston, TX
Posts: 820
Thanks: 0
Thanked 0 Times in 0 Posts
Default

There is a guy named Randy Peterson who does alot of vintage race cars. use to restore cars but now also runs a few race cars. He is about 3 miles from the track, if you want I can get his number for you.
__________________
James J.
Reply With Quote
  #8  
Old 11-22-2006, 05:45 AM
68protouring454's Avatar
68protouring454 68protouring454 is offline
Senior Member
 
Join Date: Jul 2004
Posts: 1,593
Thanks: 0
Thanked 1 Time in 1 Post
Default

anygood, real good body man is gonna want to paint it, and if he is good, he probaly has enough work.so he will not want to do just filler work and let it go.
goodluck, let us know how you make out.
Reply With Quote
  #9  
Old 11-22-2006, 07:42 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,251
Thanks: 6,733
Thanked 2,084 Times in 952 Posts
Default

Quote:
Originally Posted by 68protouring454
anygood, real good body man is gonna want to paint it, and if he is good, he probaly has enough work.so he will not want to do just filler work and let it go.
goodluck, let us know how you make out.
Jake,

I actually have several good options, though most are 300-400 miles away. Seems to be a break in most of their schedules, maybe due to the time of the year or the holidays. Kind of surprised myself, but appreciate all the feedback from you guys.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net