...

Go Back   Lateral-g Forums > Classifieds > Parts for Sale
Reload this Page Full set of Autometer guages - HRE billet center caps FS
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-15-2006, 01:11 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
  
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default Full set of Autometer guages - HRE billet center caps FS
Ok.. time to clean the garage..

Full set of Autometer guages from Penny. 5" mech Speedo and 5" data tach. Both of these are pretty new and are mounted in a '68 center bezel. If you have a 67 or 68 Camaro then this is a simple bolt in deal. Includes shift light.

Also.. 5 system guages from Autometer:

Fuel pressure - mech - (and gizmo for using in the interior of the car safely) .. older guage, in decent shape - includes braided line shown

Oil Pressure guage - mech - older guage, few dents but works great. Most likely from when the car was being drag raced.

Fuel Level - elec - looks new - Autometer part number 3514

Water Temp - mech - great shape

Voltmeter - looks new

Oil Temp - elec - looks great - includes sender

$300 plus $20 shipping for the whole deal. Or make offer

-----------------------

HRE billet center caps. From HRE (back when I had HREs). They sold these for $50 EACH. I had the HRE logo polished off since I don't like advertising. Hard to believe that wheels this expensive ship with PLASTIC center caps. Anyways, they look great but could use a touch up on the polisher. -- $60 shipped

-----------------------

Autometer Fuel guage - 0-30 Ohm - never installed $25

-----------------------

LS2 Fuel Injectors - 32lb - new and only ran on a couple dyno pulls. Previous buyer never sent $. 8 units for $50 shipped.. doubt you could buy one new one for much less than that.

-----------

I will add stuff as I find it. My email is [email protected]
Attached Images
     
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Last edited by Steve1968LS2; 10-15-2006 at 01:58 PM.
Reply With Quote
  #2  
Old 10-15-2006, 08:30 PM
Pure XS Pure XS is offline
Junior Member
  
Join Date: Jun 2006
Location: Regina, Sask
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default
interested in the injectors...not up to date on my ls2's but they are the same impedance as a 99 ls1, correct?
__________________
Russ W
67 FireChicken

HP is like a hot piece of ass....one you have it, all you want to do is hammer it.
Reply With Quote
  #3  
Old 10-15-2006, 09:39 PM
race-rodz race-rodz is offline
Senior Member
  
Join Date: Jun 2005
Posts: 1,099
Thanks: 0
Thanked 0 Times in 0 Posts
Default
email sent....put me down for the gauges
Reply With Quote
  #4  
Old 10-16-2006, 01:54 PM
ViperBlue68's Avatar
ViperBlue68 ViperBlue68 is offline
Senior Member
  
Join Date: Apr 2005
Location: Yuba City, CA (about 1/2 hour North of Sacramento)
Posts: 135
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Steve....will these injectors work on my LS1? if so...put me in line if anyone else falls thru...Thanks.
__________________
J.T.
Reply With Quote
  #5  
Old 10-16-2006, 04:30 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
  
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default
Quote:
Originally Posted by race-rodz
email sent....put me down for the gauges
Sorry.. they sold last night on pt.com just a bit after I posted them.. when they sell that quick I just feel like I priced them too low.. sorry.
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #6  
Old 10-16-2006, 04:31 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
  
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default
Quote:
Originally Posted by ViperBlue68
Steve....will these injectors work on my LS1? if so...put me in line if anyone else falls thru...Thanks.

Quote:
Originally Posted by Pure XS
interested in the injectors...not up to date on my ls2's but they are the same impedance as a 99 ls1, correct?
Same impedence howerver they are shorter and have a different plug compared to LS1 and LS6 injectors. Other than that they are the same.
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #7  
Old 10-17-2006, 01:53 AM
Pure XS Pure XS is offline
Junior Member
  
Join Date: Jun 2006
Location: Regina, Sask
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I'll take'em.....u take an MO? or i can do paypal on the weekend. (i dont have it, i use a buddies who is out of town ...long story). lemme know, but i want them, 100%
__________________
Russ W
67 FireChicken

HP is like a hot piece of ass....one you have it, all you want to do is hammer it.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 07:54 PM.
Contact Us - Lateral-g.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net