AC compressor fittings - Lateral-g Forums

**WSSix** · #1 03-07-2017, 05:45 PM

I'm looking for the part that bolts to the ports on the AC compressor for an LT1 out of an Fbody. I need one that comes off the sides and not out the back like stock. Anyone have any idea where I can look and what the proper name for that piece might be?

Thanks

dhutton · #2 03-07-2017, 06:57 PM

Pretty sure it is called a manifold. I have seen various ones on eBay.

Or something like this:

http://www.ebay.com/itm/R4-A6-A-C-Co...-/401022120297

Don

**WSSix** · #3 03-07-2017, 07:50 PM

Manifold sounds like it might be correct. Thanks for the link too, Don. That may be exactly what I need. I'll contact them and find out.

kevin_l · #4 03-07-2017, 08:09 PM

Are you trying to use a stock lt compressor?

Do you mean a compressor block adapter?

http://www.jegs.com/i/VPA/960/045024...FdY6gQodqzsGlg

**WSSix** · #5 03-07-2017, 08:13 PM

Yes, the aftermarket options for changing the accessory brackets out are ugly in my opinion, and I'm not aware of anyway to mount an alternative compressor like a Sanden in place of the factory unit.

I found that piece, too. I think it may be the same one Don linked to only from a different source. I'm emailing Vintage Air now to see if it will fit. It's listed as working with A6 compressors but technically mine is an HD6 compressor.

Thanks Kevin

**WSSix** · #6 03-08-2017, 11:37 AM

Vintage Air wrote back and said it should work for me. I'll give it a shot and find out. Thanks for the help!