WTB Holley 850 / 800 Hotchkis Baer global west speed tech 1969 Camaro or 66 chevelle
WTB Holley 850 / 800 Hotchkis Baer global west speed tech ride tech
Hello and thanks for checking out my ad of parts I'm looking to buy. I'm new to this site but not to the car world. I have 2 different cars I'm working on at the same time 🙈🙈. I know not a good idea but hey why not. First car is a 1969 Z/28 that I'm gonna road race just for fun. I drag races it a little but that got old ans since the Z was originally made to be a road racer so guess what I'm gonna do with it. To do that I need a few parts to make it worthy of putting on the track. I've already road raced it and it did well but I want it to do better. The car has a built 302 with pretty much a fresh stock suspension with poly bushings and Hotchkis front and rear lowering springs. It has a built 302 with a mechanical flat tappet cam AFR 210cc aluminum heads. I'm going to be putting an edelbrock SY1 ( SMOKEY YUNICK ) intake. So I'm gonna put a list of parts I'm looking for to get this car back to its original purpose in life. not looking to pay top dollar cause I don't have money like that. But if u have older parts that are in your way and want to get them to a good home where they'll get used and u wouldn't mind putting a few extra bucks in your pocket let me know hopefully we can work something out. The list of parts I'm looking To buy ----
- 750/800/850cfm Holley mechanical secondaries / double pumper (preferably an 850 and unaltered)
- upper / lower tubular control ( Hotchkis / global west / speed tech ride tech or any brand really don't care about the brand ).
- Hotchkis 1967-1969-camaro chassis-max-handle-bars the ones for the front end that " triangulates " the front upper control arms.
- some upgraded brakes don't really care if it's wilwood, Baer, stop tech or whatever brand just looking for an upgrade from stock. The car has no problem with braking but would rather play it safe with an upgrade.
Second car that I'm working on which is a resto mod is a 1966 real 138 SS chevelle for the chevelle I'm mostly looking for spindles and brakes. Just want some brakes that are going to stand out something in the 6 pistons front and 6/4 Pistons in the rear. Big rotors or some type of kit to stiffen up the frame. This car will have be drag raced, road raced and cruised but nothing to crazy just enough to have fun and enjoy the car to the fullest. This is my ultimate dream car and finally gonna build my chevelle.
- Big brake kit 6 piston front 6/4 piston rears with big rotors. ( any brand )
- Frame stiffening kit
any help would totally be appreciated. Any comments, suggestions, or guidance is appreciated and welcomed. Thanks for read this post and your time
Got a set of brembo calipers and brakes off of a 2014 Camaro that you can retrofit onto any application. Cheaper alternative to Wilwood and Baer kits....this set is in great condition.
.
I have a list of items, Ive been procrastinating on selling.. just been too busy.. but do have some Global west a-arms, ssbc brakes, Hotchkis springs, Hotchkis sway bar - front and rear.. 3" drop leafs with offset shackles, shortened gas tank, alumnm radiator for sbc....and several other items.
However,,they are put together on the front clip, and rear end, ready to go. I may rather sell as a complete set.
where are you located? shipping fees may be a factor on weather or not you get a deal.
i'm selling my entire project... i have a ton of brand new parts that will fit. speed tech upper/lower tubular arms, viking coil overs, heidt tall drop spindles speed tech sway bar, bushings, etc. LS6 engine out of a ZO6 corvette, T56 transmission, and a ton of other things. PM if interested.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
WTB Holley 850 / 800 Hotchkis Baer global west speed tech 1969 Camaro or 66 chevelle
& "Warhawk" 
Linear Mode
