LS engine mounts for a 1963 Pontiac GP?

[fearlessmark]

Hi, does anybody make a set of LS engine mounts for a 63 Pontiac? I've searched high and low and found nothing. The engine mounting setup for a Pontiac is nothing like an Impala, so I can't use those mounts.

[fearlessmark]

Well, with all the crickets inhabiting this post, I'd say the only way to get them is to fab them!

Thanks though!

[Vince@Meanstreets]

Originally Posted by fearlessmark

Well, with all the crickets inhabiting this post, I'd say the only way to get them is to fab them!

Thanks though!

yeah, i looked too. you are going to have to have them made. Check with Maier. He's in your neck of the woods. Sponsor list to the the left.

[BanditDave]

I would do a search on how folks mount a SBC in that body style. It is not a huge departure from that and you boils us adapter plates to get the rest of the way there. Trans mount will probably have to be a modded stock config or make your own.

Best of luck and I'll do some more digging.
Dave

[cjsgarage]

Mark!! I don't think I've ever seen your posts here. I have a couple of pairs of adjustable mounts at the shop. This weekend is obviously no good because of working on Mike's car and the Mustang, but after that we can trial fit some of what I have along with that bare block I lent you and see if anything is close. So far, I've had luck with using GM "clamshell" mounts and the adapters.