Need a 9" third member

[Matt@Lateral Dynamics]

I need an empty 9" third member. It can be cracked in non-critical areas or have a bolt hole ear broken off, etc. As long as it would work in a static environment.

[race-rodz]

im sure somebody local to ya can donate one...but if not, i got one for the price of shipping.

[Steve1968LS2]

Originally Posted by Matt@Lateral Dynamics

I need an empty 9" third member. It can be cracked in non-critical areas or have a bolt hole ear broken off, etc. As long as it would work in a static environment.

I will call John Currie down the street tomorrow and see what he has around the shop

[Matt@Lateral Dynamics]

Thanks boys. I have my fiance (secretary at a body shop) on the hunt too...hopefully there's one local.

I can't believe how hard these are to find!

[rwhite692]

The last time I was at RWI in Mooresville (I think that's where it was...) I saw a mockup 3rd member made of plastic, probably made by guys like these:

http://www.vanpeltsales.com/FH_web/replica-engines.htm

I will ask where they got it...probably would be a cool thing to have around for a fabrication shop, where you need it all the time...

[Matt@Lateral Dynamics]

Thanks Mr. White (Mr. White??), but a plastic mock up won't do much good rear end straightness fixture. I should've been more exact in my first post.

[olds87]

There is a Ford 9" rear in Mesa,AZ for $900 on Craig's List.

When I was reading the page said, it's custom made.

Here is the link 9" rear end

[Steve1968LS2]

Matt,

I went to Currie and Ray hooked you guys up with the whole deal from casing to bearings to yoke..

It's all junk but it looks like the real deal.

Gonna drop it off at BOS down by Mark today..

[Matt@Lateral Dynamics]

You, sir, rock. I'll call off the dogs.

[rwhite692]

Originally Posted by Matt@Lateral Dynamics

Thanks Mr. White (Mr. White??)......

Damn...my cover is blown....