Pro-Tour 67' Camaro build parts list WTB

[jwcarguy]

trying to get most parts together for a buddy's 67' SS/RS Camaro build that will start beginning of July

This is just a small list of some major parts we will need: (more to follow)

- Vintage Air GenIV Surefit kit # 961167
- Vintage Air 4 port bulkhead #389804
- DSE Firewall fill plate # 010901
- SpeedTech/ ATS Clutch Master mounting bracket # ATS 080002
- AutoMeter Gauges #4489, 4498, 4314, 4327, 4391, 4337 got them
- (2) Recaro Specialist S seats blk leather
- LS swap harness, pcm & dbw pedal (L76, dbw T56, LS3 map & maf)
-GM Performance Corvette Front Accessory drive kit # 19257325
- Kwik Performance A/C Relocation Bracket kit # K10143
-GM Performance LS7 Clutch Kit w/ LS2 lightened flywheel
- T56 Trans (either LS/F-body or Magnum) w/ LS bell rated to 700hp Got it
-Tick Performance Adj. Clutch Master cyl LS1 f-body #TAMCKFB. got it
- Tick Performance Remote Speed Bleeder clutch line 36" #TPSBL
-Morris Classic Concepts 67-69 Camaro 3 Point Seat Belt front set black w/ GM logo # MCSBGM-1
- MOMO " Champion" steering wheel and mounting kit for 67 Camaro

looking for new parts at great prices!

Please pm or email me with what you have and price / availability

Thanks, Jeff

[email protected]

[Vince@Meanstreets]

Give Kim and Matt a call over at Matts classic bowties. I can't even come close to their pricing.

[Vince@Meanstreets]

Jeff, just a question....are you going to run an LS7 clutch actuator (slave)?

[jwcarguy]

Vince,

I have dealt with both Matt & Kim @ Matts Classic Bowties and they are great to deal with!

I will be forwarding a list over to them, unless Curtis already did?

The slave cyl will probably be a stock piece for 98-02 f-body (if that is the trans he ends up with??)
Still trying to nail down a deal on either a built LS/F-body T56 or a Magnum (2.66)

I haven't run the LS7 slave yet
Benefits??

thanks, Jeff

[Vince@Meanstreets]

oh ok, this is for Curtis. Cool.

I was just curious on the actuator. Im making a few parts for it and wanted to see if my need help with that.

[jwcarguy]

Originally Posted by Vince@MSperfab

oh ok, this is for Curtis. Cool.

I was just curious on the actuator. Im making a few parts for it and wanted to see if my need help with that.

Vince,

Any input for improvements, is always welcomed!!

Thanks, Jeff

[Spiffav8]

Originally Posted by jwcarguy

Vince,

I have dealt with both Matt & Kim @ Matts Classic Bowties and they are great to deal with!

I will be forwarding a list over to them, unless Curtis already did?

Haven't contacted them about this. Thanks for the assist Jeff.

Originally Posted by Vince@MSperfab

oh ok, this is for Curtis. Cool.

I was just curious on the actuator. Im making a few parts for it and wanted to see if my need help with that.

Yup....it's for me. Jeff is helping me get a bunch of parts needed, while I'm on the road for work. Should be a nice stack when I get home.

[jwcarguy]

List updated