ATS Tall Spindles and Arms

[takid455]

Item Location (City/State):HAckettstown, NJ

Price:1350 shipped

Description:

Bought these from a forum member years ago and have been sitting in the box. Testing the waters to see if they get shipped or put back on the shelf. Basically looking to get out what I have into them. Speedtech can/ will supply all parts needs to complete suspension with these or build your own.

New never installed ATS/AFX tall spindles w/ B body tapers for 2nd gens. These are from ATS (Tyler) and not Speedtech whom purchased ATS rights. No drop.

Was planning to use with R&P setup but havent had time to design / build it as of current.

Sold as a package. Prefer no to split.

[raustinss]

I'd be on them like a dirty shirt if they were for a A body

[Rick D]

Just wondering not bashing but do these work without the rest of the SpeedTech package?

Maybe Blake will know? I know speedtech does not sell these without the rest of their setup as they only work as a system with their parts?

Maybe because they were from Tyler they are different?

Again I'm hoping these work with out the whole system as I'm interested in them?

[eversmann79]

I have ATS tall spindles with Global West A arms. Seems to work ok for my car

[Rick D]

Originally Posted by eversmann79

I have ATS tall spindles with Global West A arms. Seems to work ok for my car

Yes but yours are on a 69, these are for a 2nd gen which are different and not available seperate from SpeedTech, they only come as a package for the 2nd gen with all their parts which are designed to work together.

[takid455]

My understanding per communication with Tyler in the days of yore is these will work but you may need different ball joints to match the tapper. Thinking tall BJ's from say a B Body IIRC. Can use any control arm set.

[takid455]

Back on the market

[takid455]

bump. offers accepted

[qnitro]

So this is for a second get Fbody??

[takid455]

Yes.

Not 100% if they fit 1st gens, but I cant see 2 forgings being made. I believe you would get 1st gen arms and change out the BJ tapers and should be good to go in a 1st gen. Again, not 100% on that though.