TREMEC T56 for "mock-up"

[MillerBuilt]

Item Location (City/State): Mesa,AZ

Price:150.00

Description: VIPER Tremec T56 case. All internals have been removed (case is cracked and is ONLY good for mock-up) This would be very useful during fabrication ,etc. - $150.00 + shipping

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[Mkelcy]

That's a Viper T56, which places the shifter significantly more toward the front than an LS1 transmission, and places the cross-member mount about 1" to 1.5" farther from the centerline of the output shaft than does an LS1 or Magnum T56.

[MillerBuilt]

Originally Posted by Mkelcy

That's a Viper T56, which places the shifter significantly more toward the front than an LS1 transmission, and places the cross-member mount about 1" to 1.5" farther from the centerline of the output shaft than does an LS1 or Magnum T56.

Mike, thanks for clarifying the application. I purchased years ago as advertised, and have had in storage. This appears to be a bit of a black sheep with what you have pointed out. None the less, Thanks.
Jay

[Mkelcy]

Originally Posted by JSM

Mike, thanks for clarifying the application. I purchased years ago as advertised, and have had in storage. This appears to be a bit of a black sheep with what you have pointed out. None the less, Thanks.
Jay

No problem. I didn't want you to have an unhappy buyer.

[silvermonte]

Can the magnum t56 be ordered with the shifter in the same location as the viper t56? Im in the works of doing some engine set back and this would be handy to actually see where the shifter ends up.Would be handy for at least that, a cross member is fairly easy to fab.