Where to get stainless AN tube fitting?

[Flash68]

Looking for some of these but in stainless AN16 size and cannot locate. Anyone point me in the right direction?

https://www.pegasusautoracing.com/pr...p?Product=3259

[dontlifttoshift]

http://performance.phenixindustries.com/specialty.html

About mid page are all the SS weld bungs.

[Flash68]

Originally Posted by dontlifttoshift

http://performance.phenixindustries.com/specialty.html

About mid page are all the SS weld bungs.

Knew someone would hook me up here. Thanks Donny!

[dontlifttoshift]

Tell Brett to sign up and be a dealer. Their stuff is awesome, very competitive price wise and made in USA. Most of their hose ends are available in a bunch of different finishes as well.

[coolwelder62]

www.Mcmaster-Carr.com

[Solid LT1]

Phenix guys are great but, Parker Hydraulics or McMaster Carr
JIC hydraulic fittings are all 37 degree flare. I use JIC steel stuff on high pressure power steering and A/C lines.

[Flash68]

Originally Posted by dontlifttoshift

http://performance.phenixindustries.com/specialty.html

About mid page are all the SS weld bungs.

That ain't what we need. Owner said that photo (for stainless) is not accurate and they do not make that part in stainless.

Originally Posted by dontlifttoshift

Tell Brett to sign up and be a dealer. Their stuff is awesome, very competitive price wise and made in USA. Most of their hose ends are available in a bunch of different finishes as well.

Brett is going to be a dealer I think after we both talked to Bill. Nice guy and something good came out of that so that's cool.

I did finally find who makes this part for the Nascar guys who don't make it in house and it's Brown & Miller. Here is what they make and they are $32 for 16AN. Problem solved.

[GregWeld]

A real man would have just machined a couple.....


Good thing I sing like a girl.



HAHAHAHAHAHAHAHAHAHA


$32 a pop... I hope you need 20 of them.... that will slow the progress even further. Gives me more seat time before you show up and embarrass me.

[Flash68]

Originally Posted by GregWeld

A real man would have just machined a couple.....


Good thing I sing like a girl.



HAHAHAHAHAHAHAHAHAHA


$32 a pop... I hope you need 20 of them.... that will slow the progress even further. Gives me more seat time before you show up and embarrass me.

We were talking about getting them made before we found them.... didn't get a price... and I was singing like a girl waiting for that number too.

Good thing I only need 6..... Rob needs 4.... so that's our huge bulk order of 10. Could be worse.

[dontlifttoshift]

Well, shoot! It looked like what you needed. What's different in the actual product compared to the pic?