90 degree Quick Disconnect Fitting - Lateral-g Forums

DEIGuy38 · #1 11-18-2013, 09:26 PM

I have been looking and I cannot find any steel 90 degree quick disconnect fittings like the stock style in the picture. I can get the plastic ones but want the steel. I need (2) 3/8 and (1) 5/16 fitting. If anyone has these or knows where I can get them please let me know. Thanks in advance.

Vince@Meanstreets · #2 11-18-2013, 09:54 PM

Hey Guy,

I haven't had any luck on those but what I do is buy the GM service part, cut it at the hard line section. Then use an Earls compression fitting to -6 fitting to connect to the system. Had no luck with the 5/16" hose or fitting.

I'd love to find a good hose crimper to make these using the GM service hose.

GM Part # 92228251 Camaro LS3 Engine Compartment Fuel Line, sometimes you find them on ebay cheap. There are 2 90's on this part.

**Sieg** · #3 11-19-2013, 06:14 AM

I just sent the pic to a local friend to see if he can fab them. Any more specifics regarding what would make the part ideal?

dontlifttoshift · #4 11-19-2013, 10:33 AM

These http://www.techafx.com/catalog/50

**Sieg** · #5 11-19-2013, 11:09 AM

Quote:

Originally Posted by dontlifttoshift

These http://www.techafx.com/catalog/50

Donny - FTW!

Vince@Meanstreets · #6 11-19-2013, 09:24 PM

he was hoping to avoid the price.

DEIGuy38 · #7 11-20-2013, 09:18 PM

Quote:

Originally Posted by dontlifttoshift

These http://www.techafx.com/catalog/50

Quote:

Originally Posted by Vince@MSperfab

he was hoping to avoid the price.

Thanks Donny, I talked to these guys at SEMA last year. Vince and I talked about these guys but trying to avoid their price. The pic I posted was from one of Vinces post.

**Sieg** · #8 11-20-2013, 09:23 PM

Quote:

Originally Posted by DEIGuy38

Thanks Donny, I talked to these guys at SEMA last year. Vince and I talked about these guys but trying to avoid their price. The pic I posted was from one of Vinces post.

Do you need -6 or -8?

DEIGuy38 · #9 11-20-2013, 09:28 PM

Quote:

Originally Posted by Sieg

I just sent the pic to a local friend to see if he can fab them. Any more specifics regarding what would make the part ideal?

I would need 3 hoses:
(1) 5/16" hose with 90 degree and a straight fitting with about 12" of hose
(2) 3/8" hose with 90 degree and a straight fitting with about 12" of hose
(3) 3/8" hose with 90 degree and a straight fitting with about 30" of hose

If he can do it please let me know and I will get a price and give him exact measurements. Thank you for checking

Vince@Meanstreets · #10 11-20-2013, 09:30 PM

Quote:

Originally Posted by Sieg

Do you need -6 or -8?

Can he do large quantities?