WTB 6.0 bare block STD bore - Lateral-g Forums

sshep71 · #1 07-15-2013, 01:29 PM

I am looking for a bare 6.0 block with main caps. STD bore or one that will clean up with a hone. I am in the San Diego area. Let me know what you have! If the price is right I will pay to have it shipped. AL or Cast will work.

sshep71 · #2 07-24-2013, 11:52 AM

Bump!

**214Chevy** · #3 07-27-2013, 04:20 PM

I have an iron one. It has already been magnafluxed....just hone, deck and build it. PM me your cell. I can get you some pics tomorow.

**clill** · #4 07-27-2013, 04:51 PM

I have a aluminum 6.0 LS block.

sshep71 · #5 08-01-2013, 12:53 AM

CLILL I sent you a PM about your Al 6.0

sshep71 · #6 08-13-2013, 03:20 AM

Still looking!

sshep71 · #7 09-07-2013, 02:56 PM

to the top, still looking.

ALSO looking for 6.0 pistons for a stock 3.622" crank

mitch_04 · #8 09-11-2013, 06:31 AM

Are you looking for original pistons for a budget build, or aftermarket for a custom?

I have a set of rods and pistons from a '00 LQ4 and a set of rods and pistons from an unknown year LS2. I had planned on swapping the LS2 rods in place of the LQ4 rods since they are much beefier and better for boost.

sshep71 · #9 09-11-2013, 07:00 AM

Sorry about that, I am looking for aftermarket pistons. 4.01"- 4.06" bore. Dish preferred, but would consider flat tops.