Have (2) WC3 18 x 9.5 wheels for sale. With these mounted in the lips and barrels I have they should clear a 1st gen. camaro with an aftermarket front sub. (c6 setup). Backspacing should be right around 7". I will verify this tonight with a measurment. The faces are in very nice shape but are not perfect. (not show car quaility) The lips/barrels have very low miles on them. No bends, no welds, no repairs. The are used and have been drove on so they are not perfect, but my camera cant show the imperfections they are so small. The only issue with them is on the one inner barrel when I had them on my stock sub and stock lower control arm I pushed the car out on them (50 feet) and the one scrapped the lower control arm. The powerdcoat is gone on that edge but there is no structural damage at all. New from forgeline this set up would be 2,400+shipping. Looking to get 900 OBO shipped within the US for the two wheels. If you have any questions please feel free to ask..
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
FS: Forgeline (2) WC3- 18x9.5, 5x4.75
Linear Mode
