Body Shop with Carbon Fiber Experience Seattle?

[Sti_Guy]

Looking for a shop or person who has some experience finishing fresh carbon fiber parts. The parts need basic sanding then clearing.

[jy211]

location?

[Sti_Guy]

Well anyplace in Seattle really willing to drive a little bit for a good result. I would say anyone 25-35 miles from Seattle metro area.

[broken1234]

We do it weekly in the aviation world, but in Tennessee... if the parts could be shipped...

[carbonguy]

We do some carbon work. Check out Art Morrison's 60 vett, that is some of our work.

[carbonguy]

PS, we are in Puyallup. www.carbonguy.com

[Sti_Guy]

Been 3 Months and no replys from The Carbon guy, but im still looking for a shop in the area that does composits. Time is getting near for my project to be finish and this is holding me back. Any help will be appreciated!

[67goatman455]

Any body shop can handle that. I'm assuming you mean they are freshly out of the mold after being infused with resin? its as simple as sanding it with 600-800 grit paper and clearing on top of it.

[Sti_Guy]

Well now that its got some damage and will need some repair i think i need to find someone that can lay another layer on it.

[67goatman455]

if the fiber weave is damaged then yes it will need to be re-skinned. but if not you may not need to.