So I bought these wheels awhile back with intensions of getting new lips and barrels from forgeline in the future as the backspacing was to aggressive on the fronts. (Was 7.1" with my wheel with these lips/barrels). From what I understand this set up would work on a c5/c6 set up first gen camaro w/ an aftermaket frame. Or maybe just split them and change just one or the other. They are 40 bolt which seems to be the standard for many 3 piece wheel companies so the possibilities are endless. I would like to keep them together as a package deal for now and not have to tear them down more. But if I have buyers for both I will. These parts have very low miles on them. No bends, no welds, no repairs. The are used and have been drove on so they are not perfect, but my camera cant show the imperfections they are so small. The only issue with them is on the one inner barrel when I had them on my stock sub and stock lower control arm I pushed the car out on them (50 feet) and the one scrapped the lower control arm. The powerdcoat is gone on that edge but there is no structural damage at all. New from forgeline lips or barrels are 200/piece. So this set up would be 800+shipping. I think a fair number is 500 + shipping OBO. Any questions just ask.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
NJ/PA - Forgeline- 1.5" Polished Lips / 8" Silver Barrels - 18"
Linear Mode
