200-4R PML low profile cast aluminum trans pan $150 + shipping

[tommycomfort]

SOLD!

Here's a PML # 11070 aluminum transmission pan that we had on our Chevelle wagon with a 200-4R. We bought it in bare cast aluluminum and had it powder coated Chevrolet orange. It it slightly scraped up on some of the fins as seen in the pictures but otherwise it is in perfect condition. I will include a new filter, two gaskets and the 16 bolts.

PML sells the pans for $215 bare and $265 powder coated without filter or gasket.


Here's a link to their website:
http://www.yourcovers.com/transpan_11070.php

PML Transmission Pan Features:
•Sand-cast aluminum with raised fins
•3/16-inch thick wall construction to add strength to the transmission case
•3/8-inch thick gasket flange will not bend when bolts are tightened
•Machined gasket surface for a secure seal
•Boss cast into pan can be machined for a temperature sensor
•Magnetic drain plug for easier, less messy maintenance
•Mounting hardware provided
PM, email, text or call.
Tom
317 502 7460

[American]

I wonder how hard it would be to remove the powder coat??? I'll think about it... got an ArtCarr unit going in next week.

[tommycomfort]

The pan has been sold...