1967 Nova parts, 67-69 camaro parts/ chevelle parts. Grill, consoles, glass, console

[c.c.customs]

Cleaning out my garage: Nova is coming home from body shop.
More parts to come.
I have a real nice 1967 Nova SS grill. O.E With SS emblem. $225
*Center console for the 66-67nova Auto. $300 New after market, very nice.
*Full set of glass, very nice $500 out of my 67 nova, 2 door, no post
*Wiring harness out of my 67 nova. $200
*Front bumper in great shape, 1967 Nova. $200
*Rear bumper in great shape, 1967 Nova. $200
*Have L&R 67 nova inner fenders with front frames rails (factory ) bolt in, sand blasted powder coated black, great shape. $200 for the pr.
More nova parts to come.
* B&M 81050 auto Magnum grip street bandit billet shifter for over drive with cable $190 ($cost $350 from Summit), has neutral safety and reverse lights switch built in.
*MSD6A box Model #6200 $190
*MSD Pro billet distributor #8361, chevy small or big block. $150
*MSD Blaster 2 coil with mounting bracket. $25
*MSD spark plug wire set with billet flamed wire looms. $75.00 (one wire has tape on it, will need a new boot) have HEI ends on cap end and 90 Deg. boots at plug ends.
*M21-m20 4 speed rebuilt. I have a rebuilt M20-21 (?) out of my 1965 chevelle. It has never been ran since rebuilt. 10 spline input with no groves.
Case # 3885010
Tail # 3846429
Stamped into top of trans case
Po401
6K12939 $750
*Very clean 1968 Camaro fender. It is the driver side. I have stripped it to metal and is in great shape, NO rust. $400
* Also have a set of 67-68 camaro front seats. $300 pr
* 1969 Camaro driver side fender, after market. $150
*68-69 Camaro SS hood with inserts. $425
*68-69 Camaro center console with after market gauges in great to like new shape. $450
* Full set of upper & lower control arms off my 1969 camaro. I had them sand blasted and painted black. Lowers have ball joints.
Set of 4 $150 You will need to buy bushings and upper ball joints.
* Pair of front coil springs for 67-69 camaro, Hotchkis big block 1 1/2 to 2 inch lower springs, coated gray. $75.
*1967-1969 Camaro, 1964-1967 Chevelle and maybe more, chrome heater box cover, like new. $45
* Chevelle TALL disc brake spindles with rotors and bearings. $125 pr.
* Disc brake spindles. Will fit camaro, nova, chevelle. $125 (sold with out arms in picture).
*1969 Camaro header panel r/s. O.E $45.
*Black LS1 covette cover, new $75.00 pr
*Red LS1 covette engine covers, like new. $75. pr.

Tons more parts to come.
Location is Santa Cruz CA
Thanks
I put as many pictures as I could. I have pictures of everything if needed.

[c.c.customs]

Here are some of the pictures people are asking for.
Thanks

[c.c.customs]

Control arms and a set of stock springs, also have other springs.

[c.c.customs]

67 Nova Console.

[c.c.customs]

Just found a set of Heidts sub frame connectors for 67-69 camaro. New. $140 for the pr.
stock 69 camaro gas tank, good shape with sender. $20
More parts to come.

[c.c.customs]

Carbon fiber center bolt valve covers (new) for like zz4 or Tune port heads. Chrome heater cover.
I also have a pr of new billet tail light bezels for 67-68 camaro.

[wiedemab]

You don't happen to have any belt molding(s) for the '67 Chevy II do you. I'll have to make sure which side, but I need the short one on the top of the quarter (I think D.S., but I'll check)

Just thought I'd ask.

Thanks,

Brandon

[shadytd2690]

hey can you text me some more pics of the center console for the camaro 631 682 3590 thanks

[ViperBlue68]

Originally Posted by c.c.customs

Chrome heater cover.
I also have a pr of new billet tail light bezels for 67-68 camaro.

prices??

[c.c.customs]

Carbon fiber valve covers $200
Tall disc brakes with rotor $120
Chrome heater cover $40
More parts to come. I have a 20 ft trailer full, if some one wants to go to the swap meet, they can buy them all.
Thanks