Mopar A Body Viper brake upgrade

[onelapduster]

I have a nearly complete Viper caliper, B-Body rotor disc brake package.
It consists of late 70's B-Body 1 piece vented rotors. 5X4-1/2.
A-Body drum brake spindles, powder coated black.
Viper RT-10 calipers. (one has some gouges, other had coated bubbling up from brake fluid.) Both have good looking piston seals.
Viper brake pads, retainers and clips.
Goodridge stainless steel braided brake hoses with banjo bolts and hardware.
Caliper brackets to bolt calipers to spindles.
Required bearings for rotors, with dust seal.
Adjustable proportioning valve.
Mopar 1-1/8 manual master cylinder.
Mount for master cylinder to firewall, A-Body.
Heat shield for master cylinder.

What it needs.
Dust caps for rotors.
Retaining key for slot on spindle.
Retaining nut for spindle.
1 bleeder fitting for caliper.

Asking $850
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[IMPALAMAN1]

What would needed to use this on a b-body

[onelapduster]

I believe you can bolt this up without an issue.

http://www.dodgecharger.com/forum/in...;topic=15644.0

http://www.moparmusclemagazine.com/t...s/viewall.html