Ladder Bars

[Bad94]

I have searched for info on ladder bars, and i have seen pro and cons. Im wanting to set my truck up for street/drag. But I really want it to handle very good on the street. My bro has been trying to talk me into ladder bar set up. I will be running a 335 or 345 on the street and when i go to the drags i will put on slicks.


I want to be able to hook, I will be doing a small block with all the goodies now, so later down the road i can put postive pressure to it.


I was thinking of making my links 33" and angle my coil over in about 3-5 degrees in. And for rear end, i dont know if i will build a 8.5 or do a 9. I really want to keep it all GM stuff.


Thanks you
Dan

[TravisB]

Originally Posted by Bad94

But I really want it to handle very good on the street.

this sentence and ladder bars don't go hand in hand!

[rocketman]

NO ladder bars bad idea,I run a 4 link and its not to bad.or i would fab a tq arm set-up.bmr has some great stuff.i set a guys 69 camaro up with one of there tq arms it runs great and handles great.i did it like my 94 z-28.my 94 z with a bmr tq arm does a 1.5 60 ft.

[Bad94]

Originally Posted by rocketman

NO ladder bars bad idea,I run a 4 link and its not to bad.or i would fab a tq arm set-up.bmr has some great stuff.i set a guys 69 camaro up with one of there tq arms it runs great and handles great.i did it like my 94 z-28.my 94 z with a bmr tq arm does a 1.5 60 ft.

Who is bmr?

Also is there anypics of tq arm on the net, i only find the newer cars , and the pics suck.

Thanks
Dan

[rocketman]

http://www.bmrfabrication.com