C6 GrandSport Rolling Chassis...LS3 Dry Sump..Only 2K miles!!

[daytonayellaz]

I have a Grandsport rolling chassis with just 2k miles. It is basically a Z06 with a 6.2/LS3 dry sump motor. The ONLY way you can get a LS3 dry sump motor. It has the TR6060 Trans with the hardened shafts etc same as the Z06, The Z06 rear diff, The Z06 big brakes...in silver instead of red with the big performance rotors. GM built this as a more affordable way to get almost all the performance and handling of a Z06...I guess??

Comes with the complete brake system....ABS and Booster/MC, all brake lines present and not bent or cut. Comes with complete fuel system...fuel tanks and pumps, all lines present and uncut. Complete clutch M/C and lines uncut. Comes with complete air intake system with MAF sensor and original GM filter which is like new!. Comes with the original engine oil cooler, transmission cooler, rear diff cooler. The complete engine harness..uncut!. The throttle pedal...Brake and clutch pedal ass. Complete exhaust system. I could go on for a bit on what all is included... But that should cover everything that isnt obvious from the pics.

The price is 18k... which is a good deal for a basically brand new setup! Willing to ship....but as always, prefer it to be picked up. Trade offers are welcome as well.... as in like GM Muscle.. Camaro, Chevelle, Firebird, Corvette etc. Pro-Touring car of some kind.

See pics here please...
http://www.pro-touring.com/showthrea....Only-2K-miles!!

[daytonayellaz]

***COOL UPDATE*** The LS3 dry sump motor is hand built right along beside the LS7 and the ZR1 motors!! These motors are hand built in Wixom, MI. Here is a quote...

"You may be interested in knowing that LS3 dry-sump engines are hand built at GM Performance Build Center in Wixom MI. One builder does the complete engine from start to finish.

Each engine has a builder ID tag on the front surface of the intake manifold (IAFM), on the RH side."


I went and looked and sure enough the motor has the hand built tag on it along with the guys name who built the motor. I just thought this was cool. I will take a pic of the "Builder ID Tag" and post it tomorrow.

[Saleen04]

Bump for a great seller.

[daytonayellaz]

Originally Posted by Saleen04

Bump for a great seller.

Thanks Mike! I bet your busy being a new Daddy again...??

[daytonayellaz]

Thanks for the trade offers guys. I want to also add to the above list of possible trades...

Will also consider a Duramax truck trade, Maybe a GM gas truck...for the right truck. Also Cummins truck trades considered, Enclosed Trailer... 20' or longer. Bobcat, Skidsteer, Mini Excavator, Larger Kubota tractor than I have now.

Of course the Camaro, Chevelle, Corvette, GTO, Firebird etc... is always welcome

[daytonayellaz]

Was able to get my old chevelle back last weekend Need chevelle parts now So motivated to sell.

[daytonayellaz]

Ok... So I think there is the option to part this out if there is enough interest in most everything. I have had some PM's about this. So Let me know who wants what and we can explore this as a option.

[aany001]

bump for a great guy and seller

[daytonayellaz]

Originally Posted by aany001

bump for a great guy and seller

Thanks for the bump bro! Looks like the car is coming along really good!

[Hugger67RSSS]

Trav,
Hope you have this thing sold to buy some parts for the 70. If not free bump for ya!