**WTB 19x10 & 19x12 Custom wheels**

[cencalc6]

Like the title states, I would like to buy a set of custom 3pc wheels in 19x10 up front and 19x12 rears. I'm running Scott Mock's Front subframe with C6 spindles and DSE Quadralink set up in the rear. If anybody has a used set, let me know

[fletcherscustoms]

I got a set of Forgeline 19x10 and 20x12 rear with INVO tires, less than 750 miles on them total. Front back spacing is setup for aftermarket subframes. Would like to get $3000 with tires

[cencalc6]

bump! also considering 18x10 and 18x12

[cencalc6]

Originally Posted by fletcherscustoms

I got a set of Forgeline 19x10 and 20x12 rear with INVO tires, less than 750 miles on them total. Front back spacing is setup for aftermarket subframes. Would like to get $3000 with tires

Thanks for replying to my post, but I'm looking for 19's all around or 18's

[ra455ta]

I have a like new set of Fikse full polish in 18x9.5 18x11.5
want $3500 shipped for them.

[cencalc6]

Originally Posted by ra455ta

I have a like new set of Fikse full polish in 18x9.5 18x11.5
want $3500 shipped for them.

Thanks for the offer, but I need 10 and 12 widths at the least

[cencalc6]

Bump!

[Payton King]

Not sure what offset your are running, but a C6ZO6 rim in the front works well. I would guess Scotts frame would take the same. I set my car to run a C6Z06 back space in the rear as well. that way it would be easy to pick up used rims from the www.corvetteforum.com

Anyway, go to the corvette forum and look in the C6 for sale section. Rims come up there all of the time. Normally very nice stuff in the sizes you want. That is where I picked up my HRE C21's.

[cencalc6]

Thanks Payton,but I already have my DSE Rear end set up and the Z06 back wheels wont fit unless I use a Big Spacer.....I'll just way it out and hopefully find a Great Deal

[cencalc6]

bump.