69 Camaro Ls1 6speed Turbo

[DragRacer404]

Posting from my phone. A few pictures on https://lateral-g.net/forums/show...696#post368696

1969 Camaro Z28 Clone project.

This car is very close to being finished.

The body is very straight, solid, and rust free. Few dings here and there. Only place that needs metal work to make this a show peice is the driver side floor area. Previous owner repaired and didn't do a great job.

Interior is very nice and mostly new.

The LS1 and T-56 are both out of a 2002 Z28 with 30,000 miles. I have a complete cam kit and new in the box custom grind turbo cam. I have a BNIB LS7 clutch and fly wheel. Also, have 317 heads to go with the car with new double spring valve springs.

The turbo set up is just now getting finished up. Everything is custom fabbed and has a TC76 turbo with Tial blow off valve and waste gate and front mount intercooler. Only thing needed to complete is a boost controller.

Fuel pump is an Aeromotive A1000 with fuel regulator. Still need to run the fuel lines and install the bigger injectors I have.

It does need a wiring harness and computer. A custom harness is around 400 dollars and a stock computer can be found anywhere pretty cheap.

I have C6 Z51 big brakes that will go with the car.

I have it listed for 20,000. Make offer though
Any questions, please email me.
TXNRacer @ gmail.com

[DragRacer404]

Not for sale anymore. Turbo fab bill ended up being 4300 dollars more than quote. Too much money in it to sale. Lock thread