Parts for Sale: SBC/BBC DSE Suspension all kinds

[Steve68]

1. DSE F Body swaybar 1 1/8, new used for mock up, new $210 me $175(SOLD)

2. DSE Coilovers Koni with yellow springs used for short time , new $700, me $400




3.DSE Upper control arms NIB, used for mock up, these are a early version no stops toward the ball joint, BUT they do have the polished shafts, have all parts, new $695 me $525




4.GM lower control arms with DSE Delrin bushings modified for DSE coilovers, powdercoated, very nice, $200


5.AGR p/n 292112 12.1, 2 3/2 turns to lock, cast box with billet parts low miles, bought from the forum, was local to me, has a long billit pitman arm, might me for a later model, will check with AGR, primed with etch prime ready for paint! $250



will fit 77-89 direct bolt in, early cars say 1st gen, rag joint change, late model, will need a hose fitting change, this is from AGR.


6. Holly 950 HP 4150 nice carb needs rebuilt new $950 me $500


7. MSD 6AL NIB $200(SOLD)

8.MSD BTM used $60(SOLD)

9.Energy suspension 9.5129B and 9.8117B these are sway bar parts in blue endlinks and mounts $25 for both

10. Edelbrock BBC Aluminium Heads Vic Jr Oval ports NIB, new$1700 me $1500

11. Factory sub with DSE coilover conversion and A/C pocket welded in the crossmember, $600 local P/U,

Will post pics later,
make offer if interested,

pics on request havent uploaded them,

harley6869@bells o uth.net

[65_LS1_T56]

I'm interested in the AGR box. Part number? 3 or 4 bolt mount? 13/16" or 3/4" input? Pics when available too
Any info would be great.
Thanks,

[Steve68]

I'll get all that for you later today, thanks

[70Nova]

PM sent

[Steve68]

Replied, I'll work on pics later today,

[Steve68]

Pics sent, couple items have sold,

[65_LS1_T56]

Originally Posted by Steve68

5.AGR p/n 292112 12.1, 2 3/2 turns to lock, cast box with billet parts low miles, bought from the forum, was local to me, has a long billit pitman arm, might me for a later model, will check with AGR, primed with etch prime ready for paint! $250



will fit 77-89 direct bolt in, early cars say 1st gen, rag joint change, late model, will need a hose fitting change, this is from AGR.

Sorry, doesnt like what I need, thanks though and GLWS.

[Steve68]

Sent you a PM, too see what you need,

[Steve68]

http://www.agrperformance.com/catalo...e=GM&model=123

Steering box info,

GM used the same box from 64-88, 800 series box, fits different configs depending on the car, rag joint for some, pitman arm placement for others and then some got hose fittings changes,

[Steve68]

SOLD some items!!