1968 Camaro Project $25k

[01somta]

1968 camaro project, I have around 45k in reciepts not including the gen VI 502. Every part on this car is brand new except the 502 and it came out of a friends wrecked 2nd gen camaro with 1k miles. I have a little one on the way so I have a feeling won't have the time or money to finish this car.

Motor
502 Gen VI 4 bolt main, 9:1 CR
Crane solid roller p/n 168601 cam .615 .636 246 254 dur @ .050,
crane solid roller lifters
GMPP 12363400 Aluminum Rectangle port heads
GMPP 12361323 1.7 alum Rockers
Edelbrock victor jr 454-R intake
Crank Ext. ballanced, nitriated, crossed drilled gm p/n 10198922
Rods Forged 4340 Steel
Pistons GM P/N 12533507 Forged Aluminum
MSD Pro-Billet Dist
Lemons headers
Vintage air front runner setup

Transmission
tko 600

rearend
shortened ford 9" with detroit locker
33 spline axles

suspension
rear: 4 link with qa1s'
front: detroit speed kit 1
wilwood drilled slotted 4 piston front and rear

wheels
Budnik M5s 18x12 w/ 5.25" BS (R) and 18x8 w/ 4.75 BS (F)
Tires are Michelon Pilot sports 335/30/18s (R) and 245/40/18s (F).


Body
media blasted (only rust is minor and in the window channels)
new rear quarter panels
new front fenders
new 2" hood
new lower valance with 69 running lights grafted in.
new header panel.
smoothed firewall
new decklid
smoothed rear sheetmetal spoiler (3 piece)
mini tubbed
new floor pans
undercoated with raptor liner

#1 build thread
https://lateral-g.net/forums/show...ghlight=camaro


#2 build thread
https://lateral-g.net/forums/show...ghlight=camaro


Asking 25K FIRM. If you have any questions about the car just shoot me a pm.

Thanks

[SWAPMEETCRAZY]

Where are located?? thanx jim

[Ron in SoCal]

I love the work you put into this project. Are you going to actually sell it this time?

[01somta]

Originally Posted by SWAPMEETCRAZY

Where are located?? thanx jim

Choctaw, OK

[01somta]

Originally Posted by Ron in SoCal

I love the work you put into this project. Are you going to actually sell it this time?

Oh ya, I have new priorities in life. The last time I posted it for sale I just had a bunch of people calling to bs.

[Ron in SoCal]

GLWS. I think you put a lot of love into the car and someone will get a really good start.

[68KMARO]

That is a great build. You have great skill and vision and you are so close to finishing the car. Just fab in a baby seat and your set. Hope everything goes your way.

rich

[dropit69]

Would you be interested selling as a roller ??..have people looking but all want to run LS engines..

[randy]

Originally Posted by 01somta

1968 camaro project, I have around 45k in reciepts not including the gen VI 502. Every part on this car is brand new except the 502 and it came out of a friends wrecked 2nd gen camaro with 1k miles. I have a little one on the way so I have a feeling won't have the time or money to finish this car.

Motor
502 Gen VI 4 bolt main, 9:1 CR
Crane solid roller p/n 168601 cam .615 .636 246 254 dur @ .050,
crane solid roller lifters
GMPP 12363400 Aluminum Rectangle port heads
GMPP 12361323 1.7 alum Rockers
Edelbrock victor jr 454-R intake
Crank Ext. ballanced, nitriated, crossed drilled gm p/n 10198922
Rods Forged 4340 Steel
Pistons GM P/N 12533507 Forged Aluminum
MSD Pro-Billet Dist
Lemons headers
Vintage air front runner setup

Transmission
tko 600

rearend
shortened ford 9" with detroit locker
33 spline axles

suspension
rear: 4 link with qa1s'
front: detroit speed kit 1
wilwood drilled slotted 4 piston front and rear

wheels
Budnik M5s 18x12 w/ 5.25" BS (R) and 18x8 w/ 4.75 BS (F)
Tires are Michelon Pilot sports 335/30/18s (R) and 245/40/18s (F).


Body
media blasted (only rust is minor and in the window channels)
new rear quarter panels
new front fenders
new 2" hood
new lower valance with 69 running lights grafted in.
new header panel.
smoothed firewall
new decklid
smoothed rear sheetmetal spoiler (3 piece)
mini tubbed
new floor pans
undercoated with raptor liner

#1 build thread
https://lateral-g.net/forums/show...ghlight=camaro


#2 build thread
https://lateral-g.net/forums/show...ghlight=camaro


Asking 25K FIRM. If you have any questions about the car just shoot me a pm.

Thanks

im interested in the rims and tires, control arms, rear end, brake setup and im only 45min away. Anything you want to get rid of LMK

[nvmyss]

Originally Posted by randy

im interested in the rims and tires, control arms, rear end, brake setup and im only 45min away. Anything you want to get rid of LMK

Yea, I think he is trying to sell the car. Not parts of his car.
But hey good first post