...

Go Back   Lateral-g Forums > Classifieds > Parts for Sale
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 07-11-2010, 12:13 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default Mega garage sale! - LS3 take out parts back on market

Well, time to clean out the garage again.. All prices are OBO.

If two people post then time stamps will determin who gets first dibs.


First up is a complete brake system from a 2001 Z28 Camaro. Includes rotors, pads, calipers, brackets, and hoses. The rotors are fairly new with only a couple of thousand miles on them. Make or buy some brackets and put them on your project. $120 plus shipping. SALE PENDING




Next up is a bunch of take-out parts from an LS3. 58x crank, 8 rods and 8 pistons. The rings are cooked (went lean) but the rest seems fine. The only thing I would do is mic the pistons to ensure they are good to go. Crank and rods are perfect and the engine had about 7000 miles when these parts were pulled to build a stroker.

As a bonus there’s also a stock LS3 cam, springs and retainers.. add a block, a few parts and you have a dirt cheap short block. Heck, I will even toss in a few random parts I have laying around. $280 plus shipping for all. -- AVAILABLE






Finally found where I put my old McLeod SFI bellhousing. This is for an LS engine to a T56 transmission. No bolts but has the bell and the plate. Notched it to make bleading the clutch easier.

It’s this one… sell for $429 new but it’s $200 shipped here.
http://www.jegs.com/i/McLeod/673/8710-00/10002/-1




Holley 4150 Street HP 950 carb. New, left over from engine build.

Read all about it here: http://www.jegs.com/i/Holley/510/0-82951/10002/-1

Online price $540.. here it’s $300 shipped.. SOLD




Comp 8957-16 LS lifters.. LS Series Captured Link Bar Retro-Fit Roller Lifter for 1997-
Up, Fits Both Factory and RHS®, LSX, Warhawk Blocks. As stated these are for aftermarket blocks or factory blocks if you don’t want to use the plastic lifter trays. New in box.

Street price is almost $500.. $200 shipped here. Did I mention they are new? SOLD




ARP SBC 134-3601 head bolts.. new in box..

Specs here: http://www.summitracing.com/parts/ARP-134-3601/

$30 shipped -- SOLD




Powermaster 150 amp Alternator.. I bought the wrong one. Brand new in box.

Part number 58272, look up the part number and see what it fits or make it fit your project.

http://www.jegs.com/i/Powermaster/713/58272/10002/-1

$230 new.. $100 shipped OBO




Two Fragola AN fittings - Fitting, Straight, Male -10 AN to Straight Cut Male -12 AN O-Ring,

http://www.summitracing.com/parts/FRA-495107/

$18 shipped for both.. so it’s a bit better than buy one get one free.. new, never used.

__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS

Last edited by Steve1968LS2; 07-12-2010 at 05:19 PM.
Reply With Quote
  #2  
Old 07-11-2010, 02:07 PM
XLexusTech XLexusTech is offline
Senior Member
 
Join Date: Jun 2007
Posts: 1,337
Thanks: 86
Thanked 119 Times in 68 Posts
Default

Steve are those Brake caliper Aluminum? IF so can you PM me shipping to 03109 the bell too :-)

Last edited by XLexusTech; 07-11-2010 at 02:18 PM.
Reply With Quote
  #3  
Old 07-11-2010, 02:12 PM
KSBRKTRACER's Avatar
KSBRKTRACER KSBRKTRACER is offline
Senior Member
 
Join Date: Feb 2007
Location: tulsa oklahoma
Posts: 373
Thanks: 1
Thanked 4 Times in 2 Posts
Default

I want the head bolts, how do you want paid ?
Tommy Lee
Reply With Quote
  #4  
Old 07-11-2010, 02:27 PM
SR71 SR71 is offline
Member
 
Join Date: Feb 2010
Posts: 61
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I'll take the brakes if xlexustech doesn't.
Reply With Quote
  #5  
Old 07-11-2010, 02:38 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by XLexusTech View Post
Steve are those Brake caliper Aluminum? IF so can you PM me shipping to 03109 the bell too :-)
Camaro calipers are aluminum like the Corvette ones.. just a bit less stiff.

Call shipping $25 so $145 total (they are pretty heavy)

Let me know asap as someone on PT.com asked the same question.

The bell is $200 shipped.. I will hold that until you confirm you want.

UPDATE The other buyer accepted the shipping so the brakes are sold. He also wanted the bellhousing but you asked first so you get right-of-first-refuse Let me know

I'm always amazed how fast some of this stuff goes.. I need to raise my prices!!! lol (just kiddin')
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS

Last edited by Steve1968LS2; 07-11-2010 at 02:48 PM.
Reply With Quote
  #6  
Old 07-11-2010, 02:38 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by SR71 View Post
I'll take the brakes if xlexustech doesn't.
Third in line
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #7  
Old 07-11-2010, 02:41 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by KSBRKTRACER View Post
I want the head bolts, how do you want paid ?
Tommy Lee
You're first in line (by four minutes).. paypal works great and I will cover the fee.

[email protected]

Work for you?
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #8  
Old 07-11-2010, 02:47 PM
SR71 SR71 is offline
Member
 
Join Date: Feb 2010
Posts: 61
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Steve1968LS2 View Post
Third in line
no questions here, just paypal.
Reply With Quote
  #9  
Old 07-11-2010, 02:50 PM
Steve1968LS2's Avatar
Steve1968LS2 Steve1968LS2 is offline
Moderator
 
Join Date: Feb 2005
Location: Anaheim Hills, CA
Posts: 5,534
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by SR71 View Post
no questions here, just paypal.
Brakes are sold.. first reponder ok'd the shipping.

If I come across more I will let you know. These came off Nick's project Black Betty (just swapped to Wilwoods)
__________________
"A ship in port is safe, but that's not what ships are built for."

See Bad Penny run the cones: https://www.youtube.com/watch?v=8GUPPIX-92U

1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada

1968 Camaro - Project Track Rat - 440 RHS LS
Reply With Quote
  #10  
Old 07-11-2010, 04:13 PM
69496 69496 is offline
Member
 
Join Date: Dec 2008
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I posted on Pro-touring.com already but just covering my butt! I will take the LS parts (crank, rods, etc.) and also the lifters. I am local too so no shipping.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net