DSE, Heidts, Canton, KYB, tires wheels, etc

[DFRESH]

This is way too much work to do all this ---here's the stuff.


Heidts 2 inch tall drop spindles (69 Camaro--Novas), They include brand new stock size drilled/slotted rotors and calipers (upgraded Stillen pads--they worked very well) along with brand new Timken bearings throughout. Pads have 95% left--already bedded in. Used this whole setup on my car for 3 months until I put the new tires and wheels on--switched to ATS Spindles shortly thereafter which required new brakes.

$275 for everything--Plus shipping (THESE ARE SOLD)






DSE Dash for 69 Camaro---has a bit of surface rust---forgot I had it. Brand new never installed---400 plus shipping (THIS IS SOLD)




Canton brand new Oil pan---7 quart, trap doors, scraper, etc--67-69 Camaro---can't find PN--will get on Tuesday--for stock sub and steering gear---with my current engine stands--which I guess are odd--this sits half inch lower than I can have it (my car is pretty low). Comes with pick up. I am getting another one, but I have to pay retail--which sucks--so this one is up for sale. $300.00





Edelbrock Carb---worked great on my setup---had a Holley though and I have no clue on how to adjust these carbs so out it goes-- 75 plus shipping (THIS IS SOLD)




Alpine Head unit AMP--see box for details. $75 plus shipping (Brand New)




Pair of almost new KYB shocks for rear of 69 Camaro--kids use them as weapons (guns mostly) --but it's getting outta hand, so $25 plus shipping takes the pair. (THE SHOCKS ARE SOLD, KIDS STILL AVAILABLE FOR RENTAL)



Comp Cams stainless 1.6 roller rockers 3/8 stud--SBC--slightly used. Complete with adj nuts. 125 plus shipping





15 inch rally wheels and tires --3 of the tires are brand new--one of the rears has about half the tread left. Took these off when I put the Rushforths on. They are in great shape, aired up and balanced. Prefer local pick up--but if you have to have them, I will ship. $275 +shipping. (THESE ARE SOLD)





Let me know if questions. Going to take stuff to Long Beach Swap Meet in two weeks, but wanted to offer up to you guys before I went. Trying to get the third member setup for the new fab nine--so selling off what I won't be using.


Doug

[Vegas69]

How much for one of those well behaved kids?

[68FBODY]

are those heidts spindles their "tall" version?

[DFRESH]

Originally Posted by Vegas69

How much for one of those well behaved kids?

LOL---depends on which day of the week it is.

Doug

[DFRESH]

Originally Posted by 68FBODY

are those heidts spindles their "tall" version?

Yes---they are the tall drop spindles.

[LDB]

PM sent on the wheels and shocks. thanks

[holmespine]

pm sent.

[ironworks]

Doug..... SERIOUSLY you need to delete these pics and fix the 3 pennies I saw on your table that were not clocked properly. If your going to be using my panel gap improvement spray, you need to learn to clock your pennies to some level of proper rotation.

I'm just saying..... Good luck with the sale

Rodger

[DFRESH]

Originally Posted by ironworks

Doug..... SERIOUSLY you need to delete these pics and fix the 3 pennies I saw on your table that were not clocked properly. If your going to be using my panel gap improvement spray, you need to learn to clock your pennies to some level of proper rotation.

I'm just saying..... Good luck with the sale

Rodger

Good news, I tried the spray on my kids teeth first (since it says to try it on something "gapped" before actually using it on something really important) and it worked--it saved me a bundle on dental--don't have to sell any of this stuff now. Thank you to Rodger at Ironworks in Bakersfield--you just changed my life man.

Doug

[DFRESH]

All PM's returned--thanks guys.

Doug