...

Go Back   Lateral-g Forums > Technical Discussions > Paint and Body
User Name
Password



View Poll Results: Inner Fender Color?
GM JetStream Blue 20 29.41%
Semi Gloss Black 48 70.59%
Voters: 68. You may not vote on this poll

Reply
 
Thread Tools Display Modes
  #1  
Old 03-29-2010, 11:59 AM
OLDFLM's Avatar
OLDFLM OLDFLM is offline
Senior Member
 
Join Date: Jan 2008
Location: Orlando, FL
Posts: 1,386
Thanks: 183
Thanked 165 Times in 102 Posts
Default Inner Fender Color?

Since you guys picked the color on the FREEDOMBIRD I thought it only appropriate you help with this detail too...

Inner fenders are body worked to remove all the factory reliefs (dents) and all holes have been welded/filled. They are in primer and ready for paint...

So, JetStream Blue to match the firewall or "hot rod" black like the top of the radiator support? lmk

V/R,
Ty
Attached Images
 
__________________
Ty Ingle, USAF Retired
FREEDOMBIRD
Hoodpins.com, Inland Empire Driveline, Billet Accessories Direct, Modo Innovations, AutoRad Radiators, Morris Classic Concepts, Marquez Design, Anvil Auto, Fesler Billet, US Collision (DOOM), AGR, Pro-touringF-body.com, Phoenix Transmission Products, Shiftworks, ACC Carpet, Hedman Hedders, BMR Fabrication, American Autowire, MityMounts, TIN INDIAN Performance, Kauffman Racing Equipment, Pypes, RobbMc Performance, WMC, Holley, NOS, PST

Last edited by OLDFLM; 03-29-2010 at 12:01 PM.
Reply With Quote
  #2  
Old 03-29-2010, 12:40 PM
70rs's Avatar
70rs 70rs is offline
Senior Member
 
Join Date: Feb 2009
Location: Western Washington State
Posts: 3,683
Thanks: 0
Thanked 0 Times in 0 Posts
Default

You know Ty, in the email response I said blue. But looking at this picture I almost change my mind to the black. Tough call.
__________________
Eric

1970 Camaro.....on the road someday!
Reply With Quote
  #3  
Old 03-29-2010, 12:53 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,322
Thanks: 7,117
Thanked 2,179 Times in 1,004 Posts
Default

eggshell (low gloss) black. The engine should be a showcase, like a piece of jewelry in a box. Not drawing attention to the surroundings, but to the engine. Of course I would have probably done the firewall in the same black, but that's me. Any way you do it it's gonna look killer.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #4  
Old 03-29-2010, 01:32 PM
fletcherscustoms fletcherscustoms is offline
Senior Member
 
Join Date: Dec 2005
Posts: 986
Thanks: 0
Thanked 0 Times in 0 Posts
Default

the more I look at the car the more I think blue also!! I think Ty's talked me out of painting the firewall black also. yeah its all Ty's fault!!

But on a good note, shes gonna fire up this week!!
__________________
Chad Fletcher
Fletcher's Customs and Speed
229-221-4690
[email protected]
Reply With Quote
  #5  
Old 03-29-2010, 01:42 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,322
Thanks: 7,117
Thanked 2,179 Times in 1,004 Posts
Default

black showcasing the engine...............





Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #6  
Old 03-29-2010, 01:44 PM
OLDFLM's Avatar
OLDFLM OLDFLM is offline
Senior Member
 
Join Date: Jan 2008
Location: Orlando, FL
Posts: 1,386
Thanks: 183
Thanked 165 Times in 102 Posts
Default

The only thing that's missing in that pic Jody is that it's not in my car with Pontiac Baby Blue valve covers!!
__________________
Ty Ingle, USAF Retired
FREEDOMBIRD
Hoodpins.com, Inland Empire Driveline, Billet Accessories Direct, Modo Innovations, AutoRad Radiators, Morris Classic Concepts, Marquez Design, Anvil Auto, Fesler Billet, US Collision (DOOM), AGR, Pro-touringF-body.com, Phoenix Transmission Products, Shiftworks, ACC Carpet, Hedman Hedders, BMR Fabrication, American Autowire, MityMounts, TIN INDIAN Performance, Kauffman Racing Equipment, Pypes, RobbMc Performance, WMC, Holley, NOS, PST
Reply With Quote
  #7  
Old 03-29-2010, 03:28 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,322
Thanks: 7,117
Thanked 2,179 Times in 1,004 Posts
Default

Quote:
Originally Posted by OLDFLM View Post
The only thing that's missing in that pic Jody is that it's not in my car with Pontiac Baby Blue valve covers!!
I was mainly trying to show how clean the black looks as a border for a nice engine like yours. Threw a pic of Pauls car because it shows how well the black looks against a beautiful blue car.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #8  
Old 03-29-2010, 04:06 PM
70rs's Avatar
70rs 70rs is offline
Senior Member
 
Join Date: Feb 2009
Location: Western Washington State
Posts: 3,683
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by camcojb View Post
black showcasing the engine...............





Jody
Jody,
Both of those look just awesome! And that all of the aluminum is brushed or satin tops it all off really nice.

Ty, either way you go it will be great. But because the firewall is already blue then I kind of lean in the direction of blue inner fenders too.
__________________
Eric

1970 Camaro.....on the road someday!
Reply With Quote
  #9  
Old 03-29-2010, 07:11 PM
lil427z's Avatar
lil427z lil427z is offline
Senior Member
 
Join Date: Dec 2004
Posts: 871
Thanks: 0
Thanked 0 Times in 0 Posts
Default

body color .
rick k
Reply With Quote
  #10  
Old 03-29-2010, 07:13 PM
BonzoHansen's Avatar
BonzoHansen BonzoHansen is offline
Senior Member
 
Join Date: Jun 2005
Location: Hamilton, NJ 08619
Posts: 455
Thanks: 126
Thanked 66 Times in 46 Posts
Default

Quote:
Originally Posted by camcojb View Post
eggshell (low gloss) black. The engine should be a showcase, like a piece of jewelry in a box. Not drawing attention to the surroundings, but to the engine. Of course I would have probably done the firewall in the same black, but that's me. Any way you do it it's gonna look killer.

Jody
this.
__________________
Scott from NJ

Feather-light suspension, Konis just couldn't hold
I'm so glad I took a look inside your showroom doors
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net