Dart Little M 406 small block

[Cris@JCG]

Cleaning out more stuff from my office! Machine work also by Kenny Duttweiler!

Dart Little M Block
Lunati Rotating assembly- I- beam rods 6.00 lg 4340, sledgehammer crankshaft 4340, internal balance
Wiseco Pistons- 10.1 compression ratio
Clevite racing bearing
Hi volume oil pump
Moroso oil pan with pick up screen
ATI dampner
Cloyes timing chain with cover
Dart Pro1 CNC assembled heads, 227 cc Intake ports, 2.08/1.60 valves
Crane roller cam- grind # 118581 duration @.050 int 240/exh 248, lift int 543/exh 561
Crane roller lifters & rockers, comp cams pushrods
ARP fasteners thru motor

All listed items above are brand new


Polished edelbrock intake, open plenimum
Demon Carburetor 850 cfm( ran on car for about 1 day then removed

Items above used

Asking price is 8500.00

[Veryfine69]

What kind of HP & torque does this engine have? How many miles does it have? Also would this make a good street engine?


Morley

[Cris@JCG]

Brand new motor.. Never been fired up..
HP.. rough about 550.. Tq.. high 400's
Motor was built with intentions of being a street motor & to run on pump gas!

Originally Posted by Veryfine69

What kind of HP & torque does this engine have? How many miles does it have? Also would this make a good street engine?


Morley

[Veryfine69]

Which dart block is this?

[Cris@JCG]

The Little M Sportsman block is the affordable alternative for sportsman racers and serious street performance. Eliminate the time and expense of ‘blueprinting’ a stock block. The Sportsman is brand-new, fully machined, and virtually ready to assemble with off-the-shelf small-block components. With extra-thick cylinder walls, ductile iron main bearing caps (4-bolt on the center three and 2-bolt on the ends), and a competition oiling system, the Little M Sportsman is the perfect starting point for a powerful and reliable engine for the street or the race track. You can select 4.00" or 4.125" cylinder bores, and 350 or 400 main bearings. Don’t waste time on a questionable junkyard block or waste money on machining a “semi-finished” factory casting.

Originally Posted by Veryfine69

Which dart block is this?

[tones2SS]

Nice price!!
Good luck with the sale.