FAST EZ EFI fuel injection set up

[Steve88]

I have a FAST EZ EFI set up that I want to sell. The system is just a few months old and has less than 500 miles on it. Everything is in like new condition with no issues. I am converting my car over to a Grand National motor so I will no longer need this set up. $1450 Thanks

Steve

[tellyv]

What other parts does it come with fuel pump etc?

[wiedemab]

Same question as Tellyv and also, Location?

[sacarguy]

WICH INJECTORS ARE IN IT .. ie will this handle a 700 horse big block

[zcrz]

what all comes with it? The kits I'm looking at include a few more parts.

[Steve88]

There are two different part numbers available for the FAST EZ EFI set ups. There is 30226 and the 30227. The only difference between the two part numbers is that one comes with a fuel pump, regulator, filter and lines and the other does not come with fuel system components but is otherwise complete. This set up is a 30226 which is the one that does not come with a fuel pump or regulator. For comparison the 30226 is the set up that normally sells for ~$1650ish and the 30227 normally sells for ~$1995ish. I have heard that the upper limit of the EZ EFI set up is 650 hp but you may want to check with FAST to be sure. Thanks

Steve

[SUAREZ]

Designed for engines making less than 550 hp

[Steve88]

Originally Posted by SUAREZ

Designed for engines making less than 550 hp

That's incorrect, all of the FAST literature says 600hp. This is a qoute from the link below: "Bolts on to any engine under 600 hp, regardless of brand or size; the perfect choice for street rods & muscle cars"

http://www.fuelairspark.com/ezefi/de...Page_Banner_Ad

I would also sell this system with a complete first gen fuel system including a new tank modified for EFI for $1800 plus shipping. This would include the complete EZ EFI set up along with a complete fuel system that would consist of a modified tank, Prefilter, Walbro 255 liter pump, post filter, Mallory EFI regulator and lines and fittings. This would be everything you need to convert a first gen from carb to EFI. This fuel system will support up to 600hp just like the EZ EFI set up. Thanks

[notchbackgta]

Actually it says in the instructions up to 550hp, To support more horses you have to raise the fuel pressure. Up to 60 psi will support 650 hprse it says.

I am very interested, I want this but I cant spend any money until I close on my house. If you still have this in a month or so I will probably take it!

[Steve88]

Still for sale. I thought it was sold but fell thru at the last minute.

$1450 for the EZ-EFI or
$1800 for the EZ-EFI with a complete fuel system for a first gen F body including a tank modified for EFI.


Just to be clear this is a qoute from FAST's website "Bolts on to any engine under 600 hp, regardless of brand or size; the perfect choice for street rods & muscle cars"