ATS LSX oil pan, NEW - Lateral-g Forums

ironworks · #1 10-07-2009, 11:58 AM

SOLD...... SOLD....... SOLD....... SOLD

Rodger

Moose · #2 10-07-2009, 01:12 PM

rodger, what else will I need? Remote oil filter, and lines.. defintly intersted since i cant seem to find a pan that someone has in stock

ironworks · #3 10-07-2009, 02:25 PM

That sounds like all you would need. I have not installed one of these before so I don't know for sure.

Rodger

tyoneal · #4 10-08-2009, 05:07 AM

Quote:

Originally Posted by ironworks

I have an LSX road race oil pan that is uncoated with pan gasket. New never used. Has a bit of surface rust on outside from sitting on shelf for a year.

400 bucks plus shipping.

Rodger

=====================================
Are all the parts with it, and is his the pan that would fit the LS3?

What kind of coating would it need?

Thanks,

Ty

ironworks · #5 10-08-2009, 07:41 AM

Everything is there, Suction tube, gasket and pan, There are no fittings but you would pick your own fittings.

I got the pan uncoated to coat it however I wanted, powder coat the outside, paint the outside, I did not like the clear over bare metal.

**camcojb** · #6 10-08-2009, 09:11 AM

Quote:

Originally Posted by ironworks

Everything is there, Suction tube, gasket and pan, There are no fittings but you would pick your own fittings.

I got the pan uncoated to coat it however I wanted, powder coat the outside, paint the outside, I did not like the clear over bare metal.

I have a pair of the new black #12 90 deg hose ends that come with the pans; I'll mail them to whomever buys the pan for free if that helps. I used nickel coated fittings on my car.

Jody

NRV2L8 · #7 10-08-2009, 09:28 AM

If this will fit an LS3 and be able to be dropped into a 69 Camaro, I'll take it.

Tom.A · #8 10-08-2009, 09:34 AM

Quote:

Originally Posted by NRV2L8

If this will fit an LS3 and be able to be dropped into a 69 Camaro, I'll take it.

It will fit an LS3. I have the same ATS pan.

camaro2nv · #9 10-08-2009, 10:28 AM

Quote:

Originally Posted by camcojb

I have a pair of the new black #12 90 deg hose ends that come with the pans; I'll mail them to whomever buys the pan for free if that helps. I used nickel coated fittings on my car.

Jody

Wow I just bought those bad boys for 105.00 thats a deal!

NRV2L8 · #10 10-08-2009, 11:18 AM

Quote:

Originally Posted by tom_a

It will fit an LS3. I have the same ATS pan.

BUT.............Can I drop it into a 69 camaro subframe?