Ride Tech - Lateral-g Forums

HEEP · #1 09-23-2009, 11:58 AM

anyone know how to get an email to them? I sent two to the sales email address, but nothing has come back. Are they at a show or something? I just need help on which kit to order fro the front of my 70 Chevelle.

HEEP

**syborg tt** · #2 09-23-2009, 12:25 PM

Quote:

Originally Posted by HEEP

anyone know how to get an email to them? I sent two to the sales email address, but nothing has come back. Are they at a show or something? I just need help on which kit to order fro the front of my 70 Chevelle.

HEEP

Hi Heep

Here is a phone number for them. Great group of guys there.

812.481.4784

HEEP · #3 09-23-2009, 01:55 PM

I originally ordered the rear from Summit and and now they don't give a good part number for the front on my 70. I was hoping RideTech could steer me in the right direction. All they show now is kits with spindles. Not really sure If I need the spindles at this point. I'm not sure if I can do a brake upgrade if the spindles require that.

HEEP

**syborg tt** · #4 09-23-2009, 02:29 PM

I shot Tony an e-mail he may jump in any second now.

**darren@ridetech** · #5 09-24-2009, 08:59 AM

Front kit for the 70 Chevelle, using the stock height spindles is the SKW1018SA-LUCA. That will include the single adj. front Shockwaves, (if you want double adj. just substitute SA for DA) upper and lower StrongArms.

We prefer to use taller spindles to increase the camber gain and lower the roll center. Most of the tall spindles are also drop spindles, so when using them we must use a longer Shockwave as well.

HEEP · #6 09-25-2009, 04:30 AM

Darrin,
Thanks for this information. When I talked with Summit, they stated that this kit was no longer available from your company. Therefore, my confusion. They have some kit numbers that did not show up on your website as well.
Now, as far as the spindles go, if I change to the taller spindle, what rotor and brake set-up do I use? Are there stock parts, or am I into the high dollar stuff?

Thanks for getting back to me.

HEEP

krptonite · #7 09-26-2009, 08:36 AM

should i just contact darren from now on? as i have emailed numerous times in the past year and never get a reply, i find it hard to call at times due to work schedules etc ,