1967 Chevelle with ATS Spindles

[ironworks]

I have a 1967 Chevelle with the stock frame intacked. I have new rear quarters. I have ATS spindles and I believe Global West uppr control arms. The car is not in amazing shape, It needs rear floor and wheel tubs. It have all the parts like window tracks and trim that was on the car when I got it. The car was dissassembled and mocked up on chassis table to build a wild shop car. Then Mick hired us to build his dream chevelle which is pretty close to mine and lost interest in my own. The spindles and such are just spare parts I have gathered over the years. This car would be a good start for some body short on cash but long on time and eager to work. $3000 bucks

Here is picture of the car with floor still installed for mock up on the ground.

[70rs]

Still have this car Rodger?

[ironworks]

yes sir

[1badchevelle]

would you sell the GW arms?

Bump for a good deal.

[ironworks]

The a arms are designed for a Tall spindle, so I would rather keep them with the spindles. If somebody just wants the car I would split up spindles and arms but not just the arms.

Rodger

[HIboostGN]

Roger,

Do you still have the arms and spindles? I would be interested in the spindles and maybe the arms is you don't want to split the set. I will take the spindles if they can use the bolt on arms for a G-body. I believe all ATS spindles are the same but i could be wrong? If your interested let me know at [email protected]
Jerry

[ironworks]

Long gone, SOLD

Sorry