1968 Camaro
Street, track, where ever you want to take her.
Car sounds awesome, runs good, complete car but still more you could do to make it an ultimate street/track car.
(viper pearl blue w/white stripes) 4" Cowl hood -Very Straight Body-
All new rubber/ polished mouldings
12 bolt 355 posi rearend,
mini tubed, 3” DSE drop leafs, new hotckis hangers and bushings
slide-a-link traction bars
Front, All new bushings, Shocks, Sway Bar
ZR-1 Corvette rims, 17x8.5 front 17x11 in rear
Wilwood Disc Brakes in front 6 piston caliper super lites
Muncie 4 speed, New Clutch, Aluminum Flywheel, Lakewood Bellhousing
Fresh Built Small Block 400 De-Stroked (377) 11-1 Compression, 4 Bolt Main, Venolia Pistons, Brodix Track 1 Aluminum Heads, Solid Roller, Rev Kit, Super Victor Intake, Demon 750, Griffin Radiator, Much more, Less than 1500 miles on new motor. Runs on pump gas
2 chamber flowmaster w/ x pipe
15 Gallon Fuel Cell and holly fuel pump
Dyno tuned, dyno’d at 469 RWHP
Interior is pretty stock, Auto Meter gauges in Covin pot, new upholstered seats and headliner currently running Recaro buckets and 5 point harnesses (take your pick)
New Painless wiring harness
ATS spindles, Global West A-arms w. del-a-lum bushings, close ratio steering box,
Full roll cage, monte carlo bar and adjustable firewall and master cylinder braces
I have all the old paper work from 1968.
$36,500
Check out the project thread for more info and pictures
https://lateral-g.net/forums/showthread.php4?t=21008