Anvil Auto's new location now open!

[Teetoe_Jones]

Hello everyone-

Anvil Auto is pleased to announce we have moved to a new building in El Segundo, CA! We are still in the final stages of setting everything up but the big items, inventory, and equipment is all in place.

We are now located at 122 Arena St. Check out our new digs:



We typically have a 1st and 2nd Gen F body on location for display and R&D purposes. Anytime you happen to be in our area, give us a call so we can set you up with a tour of the facility.

For those not in the Los Angeles area, here is a quick visual tour of the new building:

This is our entry and waiting area. In the foreground is Manal, who answers the phones and your emails. In the backgound we have the owner Matt and one of our Designers, Tan going over some details of a current work in progress. As you can see the lobby is a bit cluttered with Anvil orders going out. (Your parts are on the way gentlemen!)


Here is the warehouse area. We have quite a bit of CF parts in stock for 1st and 2nd gen F body cars, with a new shipment of unreleased items scheduled to hit us around may 5th or later!


This the other side of the warehouse. This is where I hand inspect every part before shipping to check for any defects, weave imperfections etc. We do this to insure that you get the highest quality items on the market. You can see our smaller boxed items like A pillar pods, gauge panels, and fender braces on the back shelf.


We have another parent company on the premises that is called 3D Industrial Design. We do prototyping for all types of companies from movies to toy companies.

[Teetoe_Jones]

Here is our design center:

We are still setting up all our tools in the machine shop:

This is where we make the models and prototypes by hand:


One of the big perks of the new building- a full kitchen! No more fast food runs! This is all on the second level.


The conference room to share project info, brainstorm and collaborate as a team:


We even have an upper roof deck to catch some sun on our breaks and feel the cool ocean breeze on our faces. The ocean is about 8 blocks to the west of us.


So there you have it. Anvil Auto and 3DID's new building. As you can see we are loaded to the gills with high quality carbon fiber panels, so we are offering a 10% discount to large orders. We typically ship the next day and we are always expanding our product line. Call us today!

Tyler

[GMracer]

wow, that's a nice shop, from the outside I would never assume what was going on inside.

[Spiffav8]

WOW! That's one heck of a shop!! I'll have to check that out next time I'm down that way.


Oh and Grandpa looks pretty cool with the Carbon Cowl hood! Post up some pictures of that.

[Teetoe_Jones]

She's a bit dusty, but here ya go.

Chicane-LM decked out in Anvil Auto carbon fiber panels-
Header panel, Cowl hood with heat extractors, cowl panel with mesh, Cowl Induction vent screen, rear decklid, rear spoiler and A pillar pods in matte carbon finish.











Tyler

[ironworks]

How about hood extractors on a flat hood for a homie?

[awr68]

Nice shop....thanks for the tour!!

So how's LA treating you Tyler?

[Van B]

Sundeck for breaks? As my former boss said, "you got a break when you were hired", now get back to work.

[10Seconds]

I sure wish you would make the gauge pod type a-pillars for the 2nd gens. It would be pretty easy since you have the plain ones now, yes?

Please. These would sell great, just go ask at nastyz28, these have to be one of the most desired aftermarket parts that has let to be made.

[mazspeed]

Nice shop. Would be curious if Anvil will come out with doors and front fenders in CF.