65 Corvair Big Block project car, Olds 455

[brrymnvette]

65 Coupe with a Tornado drivetrain in it. Can't seem to make myself keep working on it. Motor has 20k on it, I replaced the fluids and filter in the trans and rear last summer and drove it up and down my parents street so I know the trans goes into 1,2, and reverse. I pulled the heads off b/c when I started it up in March one of the valves was sticking. I pulled them to send to a machine shop but lost interest. There is nothing else wrong with the motor.
Body wise it'll need a drivers side lower rear quarter patch panel and alot of dent and dings fixed in both quarters along with dings in the front where the keyhole is for the trunk. THe windshield frame needs some work too. Along with the drivers side floor. I have both floor sections, just haven't put them in.
I also have disc brake adapters for the front from California Corvair Parts, I just bought 3 weeks ago.
I've got pics of 90% of the problem areas right here. Pics are kinda big.
http://s160.photobucket.com/albums/t...vette/Corvair/
I know I can easily sell the Olds 455 for $600-700. So, I was thinking that for the entire thing. Make an offer.