SBC Parts

[Buttz1969]

I have the following parts for a small block Chevy build-up. I am going with an LS based engine so I have no use for these any more.

• 350 4-bolt main, bored .060, clearanced for stroker: $400
• Set of 8 KB Hypereutectic Pistons, 4.060, dished with stock style rods, pressed: $150
• 400 crank, 350 mains, machined .010/,010, has some surface corrosion on the 4th bearing surface, probably needs polishing: $50
• Holley 3310 Carb, manual choke, vacuum secondary: $225
• Holley mechanical fuel pump, 80 gph: $40
• MSD Pro Billet Distributor (85551): $175
• MSD 6AL Ignition Box: $175
• Chrome alternator: $50
• Chrome Chevy Bowtie timing chain cover: $10
• 400 Flywheel, needs resurfacing: $50
• Billet Specialties Valve Covers Tall Chevy Bowtie Logo and matching breathers, brand spanking new: $150
• Gold iridited tall valve covers with breathers: $10

All of the parts with the exception of the headers and the Billet Specialties valve covers were on the engine long enough to break in the cam and then it was never run again. So most of the parts are like new. The intake manifold has some corrosion in the coolant passages from sitting, but most everything else is in very good shape, if anything there is a layer of dust. I can get pictures upon request.

All parts are in the Indianapolis area. I will ship some of the smaller things at the buyers expense, and offers are gladly accepted.

OK, buy my stuff so I can get more stuff.

[Buttz1969]

Here are some pictures for your viewing pleasure.

http://picasaweb.google.com/mattbutts/SbcParts

[Buttz1969]

Lowballers welcome...














Just not too low...

[Buttz1969]

Intake is gone.

Bump for the rest.