Its a long shotbut .. badest small block ford you ever seen for sale.

[sacarguy]

This motor made 1650 rear wheel horsepower through a turbo 400 transmission in my drag radial race car using a single 114 mm turbo.

pushed that car to over 154 mph in the 8th and 200 mph in the quarter at 3400 pounds.

best of the best in it.. aluminum dart block all jessel drive train with td preasure oiled shaft rockers

cnc ported heads etc etc

turbo 400 with all aluminum drums and neal chance converter

I have over 25 k in parts in the engine alone.

has 5 dyno pulls and two quarter mile passes on it

would make for one hell of a statement on a pro touring car

would sell whole motor including fast system with tuneup in it for this setup and belt drive fuel pump for 19 k

will sell whole thing t body to out put shaft for 23 K

a STEAL at that price over 31 k in parts here not including machine work etc.

here is a vid of a 1580 rwhp dyno pull

[ironworks]

200mph in the quarter? really?
What is the ET? both 1/4 and 1/8th.

Wow

Rodger

[rwhite692]

Wow. Must be some seriously beefy hold-down straps on that dyno.

[Project_Gotham]

That car was a beast ! I have herd many stories about the blue turbo stang in San Antonio...

[sacarguy]

Originally Posted by ironworks

200mph in the quarter? really?
What is the ET? both 1/4 and 1/8th.

Wow

Rodger

7.50s on 295-65-15 radials
4.90s in the 8th

This engine will produce around 1100 rwhp on 93 octane pump gas and 18 psi with either a sinlge 100 + mm turbo or a set of 62 mm or larger twins and its low compresion and a relativly mild cam it could be driven around no problem.

here is a vid of the car with the old 360 cube motor with a 91 mm turbo that only made 1100 rwhp to give you some idea of what kind of power were talking about at that pump gas level.



if i cant sell it i may get pissed and drop it in my pro touring 66 mustang im building


oh and reason for sale is it made so much power i pulled a controll arm apart at 1000 feet and hit the wall and the cars a loss.. drivetrains just fine though.

[ironworks]

Wow that is hauling the mail. We are searching for 7.50's right now on 315 drag radial.

Good luck with the sale.

Rodger

[EBMC]

I know of a 70 mustang that would look good in!