T56 actuator bracket needed... - Lateral-g Forums

gmjj13 · #1 08-06-2008, 07:45 AM

i am in desperate need of a actuator bracket for a 95 T56. its the small part that bolts to the bellhousing where the clutch actuator bolts to. anybody have one or know where i can find one? any help would be greatly appreciated. thanks.

rwhite692 · #2 08-06-2008, 12:58 PM

Are you talking about the aluminum "spacer" that goes over the two long actuator studs?

If so, GM PN is:

12523315 - Slave Cylinder Adapter Bracket

Available at your local GM dealer, or here (for a bit more $$)

http://www.rmsautoparts.com/proddeta...2523315&cat=27

gmjj13 · #3 08-06-2008, 03:25 PM

that would be the one. thanks much

gmjj13 · #4 08-07-2008, 09:14 AM

got one on order from Bill Heard Chevrolet in GA. seems that part has been discontinued, according to my local dealer. anyway, thanks for the help...

NOGOHA · #5 02-01-2010, 09:43 AM

Did you ever get the spacer from the dealer or did you source it somewhere else? I need one to do my T-56 install in my Nova and that is the last part I need. Any help would be appreciated. I am up in Orange Park Florida. Thanks, Ryan

1HTBRRD · #6 02-08-2010, 09:58 PM

I had the same issue when I bought my t56....I found an exploded diagram that had all parts listed, then googled the actual spacer and found somebody selling them for pretty cheap.

I looked again today, but could not find the store I purchased mine from. I did find this guy on protourig.com

"The bracket is called a clutch cylinder actuator bracket, i can make as many as you need. parts,time,and material cost $129.95 plus $10.00 standard shipping and delivery. you can contact me at [email protected] or phone (317)409-4399

josh79camaro
View Public Profile
Find all posts by josh79camaro"

good luck, your close

Aintqik · #7 02-09-2010, 02:04 PM

Post a pic, I've got a bell housing and misc parts from an LT1 T56.
rj

NOGOHA · #8 02-12-2010, 05:49 AM

Here is one that sold on E-bay that I didn't bid enough for : 1704287184.
I dont have a picture account yet so this is the best I could do. If you have one please let me know. Don't think anyone has a 6 speed in a fourth gen nova yet. Can't wait to get it going. 450hp 383 fuel injected small block with a 6 speed in a Nova is going to be fun.

NOGOHA · #9 03-16-2010, 08:38 AM

Got one from autogear.net. Warner part number 13-86-172-002. They still have 18 left on the shelf if anyone else needs one.

94vortech · #10 05-04-2010, 08:33 AM

Quote:

Originally Posted by NOGOHA

Got one from autogear.net. Warner part number 13-86-172-002. They still have 18 left on the shelf if anyone else needs one.

I just ordered one from there today and they still had some. $11.92, you can't beat that!

Jerry