radiator for 69 camaro

[tony69]

hay ladies and gent's

has any one ever used a ron davis radiator?

i'm also interested if any one else would like to buy one. i can get three or more for 970.00 plus shipping.
the p/n is 11-16CA67. it has two fans hi out put and a nice over flow tank bind the rad. if interested send me an e-mail. [email protected] .
i would like to get the better price . it list for 1136.22 plus shipping.

tony69:
willy:

[ProdigyCustoms]

LOL! What incredible timing. We are launching a special on Ron Davis and PRC radiators this weekend! I have both Ron Davis and PRC in stock, both are killer units. The Ron Davis is well respected here. The PRC may new to many here, but is also a fantastic unit and looks almost exactly like the Ron Davis and has 3500 CFM 13" fans, over size shroud, Etc, just a little less money.

No minimum required

[awr68]

Frank I have a PRC rad, didn't know they offered the fans/shroud, and don't see it on their site. Do you have a pic you could share with a brother?

I have a Mark VIII fan I was going to make work...but this PRC setup interests me!

[ProdigyCustoms]

Here is the PRC units we have. Double pass for LS1 with both fitting on pass side, Steam line adapter, 13" 3600CFM fans, Bla, Bla, Bla, only $800. I have 3 on the shelf.

[awr68]

Thanks for the visual Frank! Looks a lot like mine, except mine is setup for a LT1. I'll have to get a price in the fans/shroud!

[ProdigyCustoms]

Let me know when your ready and I will see what we can do. Do you have somoen you trust to weld it or do you need to send it to them?

[awr68]

What needs to be welded? It looks like a screw on deal.