OK, here is the screamin deal of the month. I have a set of 19” and 20” Forgeline SP3P wheels (any width you want up to 12” wide). The centers are black Powder coat, Black powder coat inners, and polished lips. This is a $5200 set of wheels and I am selling them for $3500! Here is the deal, the centers were on Project Prodigy and only have a few thousand miles on them. I sent the wheels back to Forgeline to have the centers powder coated as Michael is changing the look of the car. The wheels were absolutely PERFECT before we sent them in, if I did not tell you they were slightly used you would not know. We simply wanted to change the wheels up along with some other subtle changes were doing to the car. After Powder coating the boys at Forgeline and I got talking and we decided to do something different requiring completely different wheels be made. The guys at Forgeline always help us a lot and offered us a killer deal on a new set, so I am passing the good fortune to the members.
Since the wheels when they came off Project Prodigy had offsets no other Camaro in the world could run, it runs 11” front! And 12” rear! So we are putting brand new wheel lips on them to make them the width they need to be so they fit whatever they need to fit as long as it has a 5 X 4 ¾” lug pattern. We can make the widths from 8” to 13” wide! The wheels will be in perfect as new condition. The wheel pads are built with offset to clear huge Wilwood Superlite calipers
$3500 FIRM, Contact
[email protected] or call four zero seven 832 1752
Here is a picture of the wheels on Project Prodigy when they were full polish.
Here is a picture of the Prodigy Vette with Gunmetal centers
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
19" and 20" Forgelines, (1) set, Only $3500
Linear Mode
