Lingenfelter hyd roller cam F/S - Lateral-g Forums

USAZR1 · #1 07-19-2005, 04:31 PM

LPE 74219 hydraulic roller cam,used less than 3K miles,steel billet w/melonized dist gear (no soft bronze gear needed),cam specs are as follows:
intake & exhaust duration: 219 degress at .050 (280 advertised)
lobe separation angle: 112 degrees
gross lift with 1.50 rockers: .525
gross lift with 1.60 rockers: .560
LPE designed this grind to work very well on EFI engines but they also told me they use it alot on carb'd applications w/excellent success.
Email me for a copy of the cam card.
$200 including freight to lower 48

USAZR1 · #2 07-23-2005, 09:01 PM

30 views without any comments? Make me a serious offer.

USAZR1 · #3 07-24-2005, 08:11 PM

SOLD pending funds

USAZR1 · #4 07-26-2005, 06:58 AM

Buyer backed out of deal. The cam is still available.

USAZR1 · #5 08-12-2005, 01:15 PM

The LPE cam is SOLD