For sale is an ATS LT1 T56 F-body crossmember. This crossmember is intended to be used with a Gen1 SBC + LT1-T56. The crossmember came with an engine package that I bought but unfortunately it is not the correct one for my application. The crossmember has been installed for fitment, and then found to be incorrect. It has some very light scuffs in the paint, otherwise perfect. The mounting brackets, as received during purchase (not from ATS, but the engine seller) has had some paint removed from the ends of the crossmember mounting tabs and on the frame mounting surface. I do not know why this was done but it has no effect on the performance or fitment of the part. I was going to repaint them before installation. The frame mounting bolts and transmission mount are not included. The crossmember through-bolts will be replaced with new shiny ones before shipment.
$150 shipped anywhere in the 48's. email
[email protected]
.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
ATS LT1 T56 F-body crossmember
Linear Mode
