Who has a Flaming River steering column ? - Lateral-g Forums

Tim Baillie · #1 02-23-2008, 02:52 PM

I have one here that I want to take apart and have it all painted so that it is done correctly around the tilt area.

I got the signal switch out, but that is where the similarities to a stock GM column seem to end.

How do I get it apart further ? I checked on their site and there is nothing.....

I need to get the shroud off, then get the tilt portion off...

Thanks

rwhite692 · #2 02-23-2008, 07:50 PM

Frank Serafine will know.

awr68 · #3 02-23-2008, 08:05 PM

I know Frank uses Ididit...not sure about Flaming River?

Tim Baillie · #4 02-23-2008, 08:35 PM

Quote:

Originally Posted by rwhite692

Frank Serafine will know.

And he is .............................?

**camcojb** · #5 02-23-2008, 08:50 PM

Quote:

Originally Posted by HzEmall Customs

And he is .............................?

Frank owns Prodigy Customs and Gp Group Purchase, link at left. If he doesn't know he can put you in touch with someone who does.

Jody

Tim Baillie · #6 02-23-2008, 08:51 PM

Quote:

Originally Posted by camcojb

Frank owns Prodigy Customs and Gp Group Purchase, link at left. If he doesn't know he can put you in touch with someone who does.

Jody

Cool, thanks !

rwhite692 · #7 02-23-2008, 10:00 PM

Tony you are correct Frank sells Ididit, that's what he's getting me set up with, but I think he does know a bit about the FlamingR stuff...

Could also call FlamingR, and just ask them...

Vegas69 · #8 02-23-2008, 10:37 PM

I was going to say....call Flaming River. Frank is busy finishing my car.

Tim Baillie · #9 02-23-2008, 11:12 PM

Quote:

Originally Posted by Vegas69

I was going to say....call Flaming River. Frank is busy finishing my car.

I will on Mon, was hoping someone would know si i can paint it over the weekend

BThibodeaux · #10 02-25-2008, 03:39 PM

Quote:

Originally Posted by HzEmall Customs

I will on Mon, was hoping someone would know si i can paint it over the weekend

Please let me know what you find out. I chose FR also, and need to do the same thing. I want to send the shell to powder coat though. When I placed my order I did ask them if any specialty tools were needed to disassemble, and they said no.