...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 07-22-2007, 12:24 PM
Forty Forty is offline
Junior Member
 
Join Date: Jul 2007
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Couple Questions

Hello!

First off, I'm really new to this scene so please go easy on me I'm trying to find out and learn about all this as much as possible.

I am a fan of Muscle cars since I am a little kid and my dream is to build someday a nice B-Body Mopar packed with modern technology. I do have a couple questions:

1) What is the difference between a 'pro-touring' and a 'g-machine' ?
2) Which muscle car is the best one to start with?
3) I know that you need to invest a lot of money into the car. Did you guys ever regret your decision to spent that much money on a car?

Thanks!

PS: Sorry for my bad English
Reply With Quote
  #2  
Old 07-22-2007, 12:44 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,270
Thanks: 6,811
Thanked 2,107 Times in 964 Posts
Default

Quote:
Originally Posted by Forty
Hello!

First off, I'm really new to this scene so please go easy on me I'm trying to find out and learn about all this as much as possible.

I am a fan of Muscle cars since I am a little kid and my dream is to build someday a nice B-Body Mopar packed with modern technology. I do have a couple questions:

1) What is the difference between a 'pro-touring' and a 'g-machine' ?
2) Which muscle car is the best one to start with?
3) I know that you need to invest a lot of money into the car. Did you guys ever regret your decision to spent that much money on a car?

Thanks!

PS: Sorry for my bad English
first off, welcome to the site. No difference between pro-touring and G-machine in my mind. As far as the best muscle car to start with, that's up to you. In the Mopars the E bodies have the largest following so restoration parts are much more plentiful than say a Dart or Demon. But they're all cool, Mopars are hot, so do what you like.

If you're building the car to make money I'd advise against it as it rarely happens. But if you're building it to enjoy then have at it, it's a very cool hobby.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #3  
Old 07-22-2007, 12:52 PM
Forty Forty is offline
Junior Member
 
Join Date: Jul 2007
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by camcojb
first off, welcome to the site. No difference between pro-touring and G-machine in my mind. As far as the best muscle car to start with, that's up to you. In the Mopars the E bodies have the largest following so restoration parts are much more plentiful than say a Dart or Demon. But they're all cool, Mopars are hot, so do what you like.

If you're building the car to make money I'd advise against it as it rarely happens. But if you're building it to enjoy then have at it, it's a very cool hobby.

Jody
Thank you for welcoming me

I don't want to build a car which I want to sell again - but I thought before going big with my actual plan, I want to go easy and start from the bottom to gain more knowledge and experience. Since Mopars are so expensive I thought I would start with a 'cheap' car.

I am a german citizen and I really want to make sure I know what I'm doing before spending a lot of money on parts and shipping, because everythings a little more expensive in good old Germany.
Reply With Quote
  #4  
Old 07-22-2007, 12:56 PM
JayR JayR is offline
Lateral-G Supporting Vendor
 
Join Date: Oct 2005
Location: Tacoma, WA
Posts: 1,198
Thanks: 1
Thanked 4 Times in 3 Posts
Default

Welcome to the site and the hobby. This is a great place for help and info.

1) Pro-touring and g-machines are one in the same but don't get too caught up on names and classifications. It simply means an old car made to perform better and in particular to turn and stop better since that was never really a strong suit of older American cars.

2) The best one to start with is your favorite because it needs to make you happy and keep you interested and motivated during the process of building it and driving it so know what you want and what you want to spend way in advance. You should research available aftermarket items for a car especially if you have a budget and performance requirements. That being said, Mopars aren't really the best platform to start with from an aftermarket support standpoint. But if there's no budget, then track down a B-Body and fire up the credit card!

If there is a budget, you should consider 1970s era GM stuff as it has a lot of support from the aftermarket, relatively more modern, and cheap buy-in for the initial project car.

3) If it doesn't break you financially and it makes you happy, then you should have no regrets. Careful planning will eliminate cost over-runs and not doing things 3 times because you changed your mind will also keep the budget in check. Those are the 2 biggest reasons project budgets go out of control every time.

Good Luck!
Reply With Quote
  #5  
Old 07-22-2007, 01:19 PM
deuce_454's Avatar
deuce_454 deuce_454 is offline
Senior Member
 
Join Date: May 2006
Location: Copenhagen, Denmark
Posts: 1,612
Thanks: 0
Thanked 1 Time in 1 Post
Default

i totally agree with the previous.. although id look into a g-body as they are cheap to buy and relatively cheap to maka fast, both in straight lina and corners... and according to hot rod magazine, a g-machine is a car that will pull 1+ G accelerating, braking and laterally... so a prety big goal, and not one most PT-cars reach....

and the best advice, make a plan and STICK to it! so more planning and thinking...
__________________
Elwood:We're 105 miles from Chicago, we have a full tank of gas, half pack of cigarettes, it's dark out and we're wearing sunglasses.
Jake: Hit it.
Reply With Quote
  #6  
Old 07-22-2007, 01:33 PM
ProdigyCustoms ProdigyCustoms is offline
Senior Member
 
Join Date: Mar 2005
Posts: 3,859
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Well, of coarse a first gen Camaro is the easiest to build as you can buy ANYTHING your heart desires for 67 - 69 Camaro's. Late model G Bodies like mid 80s Mailibus and Monte Carlos, and others, are quick easy G machines on a budget. We just finished a budget (budget for us) build on one and LOVE IT! Problem is return on investment and desireability unfortunatly is still weak compared to a Early Camaro.
__________________
Frank Serafine
Reply With Quote
  #7  
Old 07-22-2007, 03:19 PM
Ummgawa's Avatar
Ummgawa Ummgawa is offline
Moderator
 
Join Date: Jul 2004
Location: Douglasville, Ga.
Posts: 2,876
Thanks: 94
Thanked 38 Times in 21 Posts
Default

Quote:
Originally Posted by Forty
Hello!

First off, I'm really new to this scene so please go easy on me I'm trying to find out and learn about all this as much as possible.

I am a fan of Muscle cars since I am a little kid and my dream is to build someday a nice B-Body Mopar packed with modern technology. I do have a couple questions:

1) What is the difference between a 'pro-touring' and a 'g-machine' ?
2) Which muscle car is the best one to start with?
3) I know that you need to invest a lot of money into the car. Did you guys ever regret your decision to spent that much money on a car?

Thanks!

PS: Sorry for my bad English
1. No
2. Your favorite car
3.Absolutely, until I get the first thumbs up.
__________________
Jim
Reply With Quote
  #8  
Old 07-22-2007, 06:56 PM
ProTouring442's Avatar
ProTouring442 ProTouring442 is offline
Senior Member
 
Join Date: Feb 2005
Location: Harriman, TN
Posts: 1,330
Thanks: 19
Thanked 34 Times in 16 Posts
Default

I think they are pretty much the same, but there are definitely many interpretations on the theme. Some cars are nearly race cars, others are more show, while still others are somewhere else. My car is a little more luxury as compared to many PT cars, but as it is all a home build, not as high dollar as some others.

As for which car to start with, the one you like. Saturday evening, I saw a Porshce 928 with a big block Chevy sitting under its hood! There are lots of good American muscle to start with, but it doesn't have to be American to be PT. I think a nice BMW 635 with an LS6 and a 6-speed would be very cool!

As for the money, the way I figure it, I probably would have lost more money if I had purchased a new car that would do what I want my old car to do, so what they hey... I am happy as long as it's paid for!

Shiny Side Up!
Bill
__________________
You ever wonder what medieval cook looked at the guts of a pig and thought, "I bet if you washed out that poop tube, you could stuff it with meat and eat it."
Reply With Quote
  #9  
Old 07-24-2007, 08:25 PM
andrewmp6 andrewmp6 is offline
Senior Member
 
Join Date: Jul 2007
Posts: 641
Thanks: 0
Thanked 0 Times in 0 Posts
Default

another name is restomod same meaning but mostly early ford mustangs. honestly any car can pull a full g on a skid pad just takes alot of money.
Reply With Quote
  #10  
Old 07-24-2007, 08:45 PM
XcYZ's Avatar
XcYZ XcYZ is offline
Administrator
 
Join Date: Jun 2004
Location: Rochester, Minnesota
Posts: 8,998
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Welcome. I think you might be our first member from Germany? I know we have quite a few members from Europe.

As others have said, there's no reason to get caught up in titles of build styles. Build the car with the vision you have.
__________________
Scott

My LS7 69 Camaro
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net