AIC Choices / Ideas

[JamesJ]

Jody

On page 64-M of that packet there is a picture of a "sealed remote AIC housing" do you have any info on that? I will be using a procharger with 12 pounds of boost do you think that I need to get that. I will call them and ask them for there opions as well.

[camcojb]

Originally Posted by JamesJ

You are correct, but I am mounting mine upside down so then it would be on the top and I dont think that I am going to have the hood room. That is why i am using the remote style one. I have just put a plate over the area that the AIC would mount to.

I think I am going to order that one from Kinsler.

If you get me a pic of your throttle body where the IAC mounts, I probably have a billet aluminum blockoff for it you can have.

Jody

[JamesJ]

Originally Posted by camcojb

If you get me a pic of your throttle body where the IAC mounts, I probably have a billet aluminum blockoff for it you can have.

Jody

Thanks, I have already made a aluminum plate for it.

Any ideas on the sealed remote housing?

[camcojb]

Originally Posted by JamesJ

Thanks, I have already made a aluminum plate for it.

Any ideas on the sealed remote housing?

Not sure what you're asking. You can get the remote IAC housing and filter from Kinsler in the link I posted earlier. Not sure whom else sells it.

Jody

[JamesJ]

On page 64 they (Kinsler) has a sealed housing they sell that they say you need to use for boosed aplication

[camcojb]

Originally Posted by JamesJ

On page 64 they (Kinsler) has a sealed housing they sell that they say you need to use for boosed aplication

good point, you'll likely need it. Otherwise you would have a leak under boost.

Jody

Bds also sells it if anyone already deals with them