Any Gen 3 Hemi experience....

[Ketzer]

Anybody done a late model Hemi in a project?
Curious who's harness you used and why. Any issues you might have run into?


Jeff-

[vipercuda]

We have done a few of these projects if you want to give me a call

Mike

813-789-6179

[Schwartz Perf]

HotwireAuto is about the only company i've found that has been doing it a while.

-Dale

[grif54]

I used Street & Performance in Arkansas for two LS harnesses. I know they do HEMI harnesses also. They were very helpful both times every step of the way. Hope it helps you out.

[Ketzer]

Originally Posted by vipercuda

We have done a few of these projects if you want to give me a call

Mike

813-789-6179

Thanks Mike! Waiting for my day off, otherwise I'll catch a call the second you say hello....

Originally Posted by Schwartz Perf

HotwireAuto is about the only company i've found that has been doing it a while.

-Dale

Thanks Dale, that is one of the companies I'm looking at along with BPE http://www.bpeusa.com/G3Electronics.asp

Originally Posted by grif54

I used Street & Performance in Arkansas for two LS harnesses. I know they do HEMI harnesses also. They were very helpful both times every step of the way. Hope it helps you out.

The company Dale referenced is also in the same small town in Arkansas... probably a co-ink-a-dink.

[CJD Automotive]

We've done quite a few. We used to make our own harness by pairing down the stocker, but as of this year, we simply use the Holley EFI computer and harness. I like the Holley setup as you can always upgrade your engine with just a few key strokes.

[Schwartz Perf]

Bouchillon (BPE) uses Hotwire Auto. They might get you a better deal than going direct though! Randy over at BPE is a great guy.

-Dale

[Ketzer]

Originally Posted by Schwartz Perf

Bouchillon (BPE) uses Hotwire Auto. They might get you a better deal than going direct though! Randy over at BPE is a great guy.

-Dale

Very good info Dale. Price is definitely important but Hotwire is a lot closer to me if I got into some trouble with my first Hemi transplant.

[Riddler]

All the Mopar shops are using Hotwire harnesses. I'm working with Affordable Fuel Injection in Michigan to build harnesses that work with HP tuners and the stock PCM.

Riddler

[andrewb70]

Holley now offers plug-n-play harness and ECU kits for GenIII hemies.

Andrew